SFCE 90 (3000 PSI)

SAE flange adapter, soldered

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction Angle 90°
Construction type soldered
Design SAE flange adapter
Material S355J2G3 (C22)
Pressure series 3000 psi
Scope of supply connecting piece only
Standard DIN 3901/3902
Surface electro galvanised

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Ø RAD mm Size PB 10.9 bar S3 mm A1 mm L mm S2 mm M metr. A M unc AF mm I mm S1 mm Series L Footn M metr. Footn
Product Name Ø RAD mm Size PB 10.9 bar S3 mm A1 mm L mm S2 mm M metr. A M unc AF mm I mm S1 mm Series L Footn M metr. Footn
SFCE 3001-90 L15 15 1/2" 315 58 30.2 8.7 43.0 M 8 x 30 M 22 x 1.5 5/16" x 1.1/4" 22 7.0 40 L - -
SFCE 3001-90 S16 16 1/2" 350 60 30.2 8.7 42.5 M 8 x 30 M 24 x 1.5 5/16" x 1.1/4" 24 7.5 40 L - -
SFCE 3002-90 L22 22 3/4" 160 80 38.1 10.7 63.5 M 10 x 35 M 30 x 2 3/8" x 1.1/2" 30 7.5 59 L - -
SFCE 3003-90 L28 28 1" 160 80 44.4 10.7 75.5 M 10 x 35 M 36 x 2 3/8" x 1.1/2" 36 7.5 68 L - -
SFCE 3003-90 S25 25 1" 315 95 44.4 10.7 71.0 M 10 x 35 M 36 x 2 3/8" x 1.1/2" 36 12.0 68 L - -
SFCE 3003-90 S30 30 1" 315 96 44.4 10.7 69.5 M 10 x 35 M 42 x 2 3/8" x 1.1/2" 46 13.5 68 L - -
SFCE 3004-90 L35 35 1.1/4" 160 116 50.8 - 94.5 *2 M 45 x 2 7/16" x 1.1/2" 46 10.5 86 L = Choice of 10.5, 12.0 or 12.5 = Choice of M 10 x 30 or M 12 x 35
SFCE 3005-90 L42 42 1.1/2" 160 127 60.3 13.5 104.0 M 12 x 35 M 52 x 2 1/2" x 1.1/2" 55 11.0 98 L - -
SFCE 3005-90 S38 38 1.1/2" 210 130 60.3 13.5 99.0 M 12 x 35 M 52 x 2 1/2" x 1.1/2" 55 16.0 98 L - -
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø RAD = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.