AFS 90 SRE (3000 PSI)

SAE welded on flange, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction Angle 90°
Design SAE welded on flange
Material S355J2G3 (ST52.3)
Mounting Screw bore hole
Pressure series 3000 psi
Scope of supply flange only
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name PB bar Pipe Size E mm L mm S2 mm C mm A mm F1 mm S1 mm B2 mm B1 mm
Product Name PB bar Pipe Size E mm L mm S2 mm C mm A mm F1 mm S1 mm B2 mm B1 mm
AFS 80/90 SRE 20 250 20 x 3 1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 17.5 9.0 37 38.1 20 60 20 13 14
AFS 80/90 SRE 22 160 22 x 2 1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 17.5 9.0 37 38.1 22 60 20 13 18
AFS 80/90 SRE 25 250 25 x 3 1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 17.5 9.0 37 38.1 25 60 20 13 19
AFS 80/90 SRE 28 160 28 x 3 1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 17.5 9.0 37 38.1 28 60 20 13 22
AFS 100/90 SRE 25 250 25 x 3 3/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 22.3 11.0 38 47.6 25 63 24 19 19
AFS 100/90 SRE 28 160 28 x 3 3/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 22.3 11.0 38 47.6 28 63 24 19 22
AFS 100/90 SRE 30 250 30 x 4 3/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 22.3 11.0 38 47.6 30 63 24 19 22
AFS 100/90 SRE 35 160 35 x 4 3/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 22.3 11.0 38 47.6 35 63 24 19 27
AFS 102/90 SRE 30 250 30 x 4 1" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 26.2 11.0 43 52.4 30 70 28 25 22
AFS 102/90 SRE 35 160 35 x 4 1" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 26.2 11.0 43 52.4 35 70 28 25 27
AFS 102/90 SRE 38 250 38 x 4 1" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 26.2 11.0 43 52.4 38 70 28 25 30
AFS 102/90 SRE 42 160 42 x 3 1" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 26.2 11.0 43 52.4 42 70 28 25 36
AFS 104/90 SRE 38 250 38 x 4 1.1/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 30.2 11.5 51 58.7 38 85 34 32 30
AFS 104/90 SRE 42 160 42 x 3 1.1/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 30.2 11.5 51 58.7 42 85 34 32 36
AFS 104/90 SRE 48 160 48.3 x 4.5 1.1/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 30.2 11.5 51 58.7 49 85 34 32 39
AFS 106/90 SRE 38 210 38 x 4 1.1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 35.7 13.5 56 69.9 38 95 38 38 30
AFS 106/90 SRE 42 160 42 x 3 1.1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 35.7 13.5 56 69.9 42 95 38 38 36
AFS 106/90 SRE 48 160 48.3 x 4.5 1.1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 35.7 13.5 56 69.9 49 95 38 38 39
AFS 108/90 SRE 60 200 60.3 x 5.6 2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 42.9 13.5 65 77.8 61 110 42 51 49
AFS 108/90 SRE 76 200 76.1 x 7.1 2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 42.9 13.5 65 77.8 77 110 42 51 62
PN = Nominal pressure
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.