AFS 90 SRE (6000 PSI)

SAE welded on flange, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction Angle 90°
Design SAE welded on flange
Material S355J2G3 (ST52.3)
Mounting Screw bore hole
Pressure series 6000 psi
Scope of supply flange only
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name PB bar Pipe Size E mm L mm S2 mm C mm A mm F1 mm S1 mm B2 mm B1 mm L Footn M metr.
Product Name PB bar Pipe Size E mm L mm S2 mm C mm A mm F1 mm S1 mm B2 mm B1 mm L Footn M metr.
AFS 401/90 SRE 20 315 20 x 3 1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 18.2 9.0 37 40.5 20 60 20 13 14 - -
AFS 401/90 SRE 25 315 25 x 4 1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 18.2 9.0 37 40.5 25 60 20 13 17 - -
AFS 402/90 SRE 25 315 25 x 4 3/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 23.8 11.0 43 50.8 25 70 28 19 17 - -
AFS 402/90 SRE 30 315 30 x 4 3/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 23.8 11.0 43 50.8 30 70 28 19 22 - -
AFS 403/90 SRE 30 315 30 x 4 1" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 27.8 13.0 51 57.2 30 85 34 25 22 - -
AFS 403/90 SRE 38 315 38 x 5 1" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 27.8 13.0 51 57.2 38 85 34 25 28 - -
AFS 404/90 SRE 38 315 38 x 5 1.1/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 31.8 - 56 66.6 38 95 38 32 28 = 14.5 for metric screws; 13.5 for UNC screws -
AFS 404/90 SRE 48 315 48.3 x 8 1.1/4" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 31.8 - 56 66.6 49 95 38 32 32 = 14.5 for metric screws; 13.5 for UNC screws -
AFS 405/90 SRE 38 315 38 x 5 1.1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 36.5 17.0 65 79.3 38 110 42 38 28 - M 16 x 55
AFS 405/90 SRE 48 315 48.3 x 8 1.1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 36.5 17.0 65 79.3 49 110 42 38 32 - M 16 x 55
AFS 405/90 SRE 60 315 60.3 x 10 1.1/2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 36.5 17.0 65 79.3 61 110 42 38 40 - M 16 x 55
AFS 406/90 SRE 60 315 60.3 x 10 2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 44.5 21.0 75 96.8 61 133 45 51 40 - -
AFS 406/90 SRE 76 315 76.1 x 12.5 2" SAE welded on flange, angle 90°; flange only; S355J2G3 (ST52.3) 44.5 21.0 92 96.8 74 150 45 51 50 - -
PN = Nominal pressure
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.