FH (3000 PSI)

SAE flange half

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE flange half
Material Steel
Mounting Screw bore hole
Pressure series 3000 psi
Scope of supply flange only
Standard SAE J 518
ISO 6162-1
Surface electro galvanised

Hints

Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB bar H mm Size B mm D mm E mm L mm M metr. C mm A mm G mm M unc F mm I mm
Product Name PB bar H mm Size B mm D mm E mm L mm M metr. C mm A mm G mm M unc F mm I mm
FH 3001 350 13 1/2" 24.3 SAE flange half; Steel 54 8.7 8.7 M 8 x 25 38.1 31.0 19 5/16" x 1.1/4" 22.8 6.2
FH 3002 350 14 3/4" 32.1 SAE flange half; Steel 65 11.1 10.7 M 10 x 30 47.6 38.9 22 3/8" x 1.1/4" 25.9 6.2
FH 3003 315 16 1" 38.5 SAE flange half; Steel 70 13.1 10.7 M 10 x 30 52.4 45.2 24 3/8" x 1.1/4" 29.2 7.5
FH 3004 250 16 1.1/4" 43.7 SAE flange half; Steel 79 15.1 12.0 M 10 x 30 58.7 51.6 22 7/16" x 1.1/2" 36.3 7.5
FH 3014 250 16 1.1/4" 43.7 SAE flange half; Steel 79 15.1 10.7 M 10 x 30 58.7 51.6 22 - 36.3 7.5
FH 3044 250 16 1.1/4" 43.7 SAE flange half; Steel 79 15.1 12.7 M 12 x 35 58.7 51.6 22 - 36.3 7.5
FH 3005 200 16 1.1/2" 50.8 SAE flange half; Steel 94 17.9 13.5 M 12 x 35 69.9 61.1 25 1/2" x 1.1/2" 41.1 7.5
FH 3006 200 16 2" 62.7 SAE flange half; Steel 102 21.4 13.5 M 12 x 35 77.8 72.2 26 1/2" x 1.1/2" 48.2 9.0
FH 3007 160 19 2.1/2" 74.9 SAE flange half; Steel 114 25.4 13.5 M 12 x 40 88.9 84.9 38 1/2" x 1.1/2" 54.1 9.0
FH 3008 160 22 3" 90.9 SAE flange half; Steel 135 31.0 17.0 M 16 x 50 106.4 102.4 41 5/8" x 2" 65.3 9.0
FH 3009 35 22 3.1/2" 102.4 SAE flange half; Steel 152 34.9 17.0 M 16 x 50 120.7 115.1 28 5/8" x 2" 69.5 10.7
FH 3010 35 25 4" 115.1 SAE flange half; Steel 162 38.9 17.0 M 16 x 50 130.2 127.8 35 5/8" x 2" 76.0 10.7
FH 3011 35 28 5" 140.5 SAE flange half; Steel 184 46.0 17.0 M 16 x 55 152.4 153.2 41 5/8" x 2" 90.0 10.7
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.