SFH (3000 PSI/6000 PSI) VA

SAE flange half

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design SAE flange half
Material Stainless steel
Mounting Screw bore hole
Scope of supply flange only
Standard SAE J518
ISO 6162-1/-2

Hints

Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name M metr. D mm M unc Flange size PB 10.9 bar Pressure series A mm B mm L mm C mm
Product Name M metr. D mm M unc Flange size PB 10.9 bar Pressure series A mm B mm L mm C mm
SFH 13 VA M 8 x 25 54 5/16" x 1.1/4" 1/2" 350 3000 PSI 31.0 6.2 8.7 38.1
SFH 20 VA M 10 x 30 65 3/8" x 1.1/4" 3/4" 350 3000 PSI 38.9 6.2 10.7 47.6
SFH 25 VA M 10 x 30 70 3/8" x 1.1/4" 1" 315 3000 PSI 45.2 7.5 10.7 52.4
SFH 32 VA M 10 x 30 79 7/16" x 1.1/2" 1.1/4" 250 3000 PSI 51.6 7.5 12.0 58.7
SFH 40 VA M 12 x 35 94 1/2" x 1.1/2" 1.1/2" 200 3000 PSI 61.1 7.5 13.5 69.9
SFH 50 VA M 12 x 35 102 1/2" x 1.1/2" 2" 200 3000 PSI 72.2 9.0 13.5 77.8
SFH 60 VA M 12 x 40 114 1/2" x 1.1/2" 2.1/2" 160 3000 PSI 84.9 9.0 13.5 88.9
SFH 75 VA M 16 x 50 135 5/8" x 2" 3" 160 3000 PSI 102.4 9.0 17.0 106.4
SFH6 13 VA M 8 x 30 56 5/16" x 1.1/4" 1/2" 400 6000 PSI 32.5 7.2 8.7 40.5
SFH6 20 VA M 10 x 35 71 3/8" x 1.1/2" 3/4" 400 6000 PSI 42.1 8.3 10.7 50.8
SFH6 25 VA M 12 x 45 81 - 1" 400 6000 PSI 48.4 9.0 13.0 57.2
SFH6 32 VA M 14 x 45 95 - 1.1/4" 400 6000 PSI 54.8 9.8 14.7 66.7
SFH6 40 VA M 16 x 55 113 5/8" x 2" 1.1/2" 400 6000 PSI 64.3 12.1 17.0 79.4
SFH6 50 VA M 20 x 70 133 3/4" x 2.1/2" 2" 400 6000 PSI 80.2 12.1 21.0 96.8

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.