VF (6000 PSI)

SAE full flange

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE full flange
Material Steel
Mounting Screw bore hole
Pressure series 6000 psi
Scope of supply flange only
Standard SAE J518
ISO 6162-1/-2
Surface electro galvanised

Hints

Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Size PB 10.9 bar H mm B mm E mm L mm C mm M metr. D mm M unc A mm G mm I mm F mm
Product Name Size PB 10.9 bar H mm B mm E mm L mm C mm M metr. D mm M unc A mm G mm I mm F mm
VF 6001 1/2" 420 16 24.6 18.2 8.7 40.5 M 8 x 30 56 5/16" x 1.1/4" 32.5 22 7.2 47.2
VF 6002 3/4" 420 19 32.5 23.8 10.7 50.8 M 10 x 35 71 3/8" x 1.1/2" 42.1 28 8.3 60.0
VF 6003 1" 420 24 38.9 27.8 13.0 57.2 M 12 x 45 81 - 48.4 33 9.0 69.9
VF 6003-12 1" 420 24 38.9 27.8 12.0 57.2 - 81 7/16" x 1.3/4" 48.4 33 9.0 69.9
VF 6004 1.1/4" 420 27 44.5 31.8 14.7 66.7 M 14 x 45 95 1/2" x 1.3/4" 54.8 38 9.8 77.2
VF 6005 1.1/2" 420 30 51.6 36.5 17.0 79.4 M 16 x 55 113 5/8" x 2" 64.3 43 12.1 95.0
VF 6006 2" 420 37 67.6 44.5 21.0 96.8 M 20 x 70 133 3/4" x 2.1/2" 80.2 52 12.1 113.8
PN = Nominal pressure PB = Max. operating pressure
Series: LL = Very light L = Light S = Heavy
Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.