VFG (3000/6000 PSI)

SAE full flange with thread

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE full flange
Material S355J2G3 (ST52.3)
Mounting Inner thread for metric screws
Standard SAE J 518 C
ISO 6162
Surface electro galvanised

Article Table

Product Name Size PB 10.9 bar H mm B mm E mm C mm M metr. D mm Pressure series A mm G mm I mm F mm
Product Name Size PB 10.9 bar H mm B mm E mm C mm M metr. D mm Pressure series A mm G mm I mm F mm
VFG 3001 1/2" 350 13 24.3 17.5 38.1 M 8 54 3000 PSI 31.0 19 6.2 45.6
VFG 3002 3/4" 350 14 32.1 22.3 47.6 M 10 65 3000 PSI 38.9 22 6.2 51.8
VFG 3003 1" 315 16 38.5 26.2 52.4 M 10 70 3000 PSI 45.2 24 7.5 58.4
VFG 3004 1.1/4" 250 14 43.7 30.2 58.7 M 10 79 3000 PSI 51.6 22 7.5 72.6
VFG 3005 1.1/2" 200 16 50.8 35.7 69.9 M 12 94 3000 PSI 61.1 25 7.5 82.2
VFG 3006 2" 200 16 62.7 42.9 77.8 M 12 102 3000 PSI 72.2 26 9.0 96.4
VFG 3007 2.1/2" 160 19 74.9 50.8 88.9 M 12 114 3000 PSI 84.9 38 9.0 108.2
VFG 3008 3" 160 22 90.9 61.9 106.4 M 16 135 3000 PSI 102.4 41 9.0 130.6
VFG 3009 3.1/2" 35 22 102.4 69.9 120.7 M 16 152 3000 PSI 115.1 28 10.7 139.0
VFG 3010 4" 35 25 115.1 77.8 130.2 M 16 162 3000 PSI 127.8 35 10.7 152.0
VFG 3011 5" 35 28 140.5 92.1 152.4 M 16 184 3000 PSI 153.2 41 10.7 180.0
VFG 6001 1/2" 400 16 24.6 18.2 40.5 M 8 56 6000 PSI 32.5 22 7.2 47.2
VFG 6002 3/4" 400 19 32.5 23.8 50.8 M 10 71 6000 PSI 42.1 28 8.3 60.0
VFG 6003 1" 400 24 38.9 27.8 57.2 M 12 81 6000 PSI 48.4 33 9.0 69.9
VFG 6004 1.1/4" 400 27 44.5 31.8 66.7 M 14 95 6000 PSI 54.8 38 9.8 77.2
VFG 6005 1.1/2" 400 30 51.6 36.5 79.4 M 16 113 6000 PSI 64.3 43 12.1 95.0
VFG 6006 2" 400 37 67.6 44.5 96.8 M 20 133 6000 PSI 80.2 52 12.1 113.8
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.