T-GD

SAE block flange, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction T shaped
Design SAE block flange
Material S355J2G3 (ST52.3)
Mounting Inner thread for metric screws
Pressure series 6000 psi
Standard SAE J 518 C
ISO 6162
Surface electro galvanised

Article Table

Product Name E1 mm PB bar Size Ø B mm D mm L mm S2 mm M metr. C mm G mm E2 mm S1 mm F mm
Product Name E1 mm PB bar Size Ø B mm D mm L mm S2 mm M metr. C mm G mm E2 mm S1 mm F mm
T GD 602-602 23.8 400 3/4" 19 72 11 36 M 10 50.8 55 23.8 32 72
T GD 603-603 27.8 400 1" 23 82 14 40 M 12 57.2 64 27.8 37 80
T GD 604-604 31.8 400 1.1/4" 30 100 16 46 M 14 66.7 72 31.8 41 92
T GD 605-605 36.5 400 1.1/2" 38 114 18 53.5 M 16 79.4 89 36.5 50 107
T GD 606-606 44.5 400 2" 50 133 22 70 M 20 96.8 105 44.5 59 140
PN = Nominal pressure
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.