AP (3000/6000 PSI)

SAE end plate

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE end plate
Material Steel ST 35
Mounting Screw bore hole
Standard SAE J 518 C
ISO 6162
Surface black oiled

Article Table

Product Name D mm E mm L mm C mm H mm Size F mm Pressure series
Product Name D mm E mm L mm C mm H mm Size F mm Pressure series
AP 80 54 17.5 9 38.1 3 1/2" 45.6 3000 PSI
AP 100 65 22.3 11 47.6 3 3/4" 51.8 3000 PSI
AP 102 70 26.2 11 52.4 3 1" 58.4 3000 PSI
AP 104 79 30.2 11 58.7 3 1.1/4" 72.6 3000 PSI
AP 106 94 35.7 13 69.9 3 1.1/2" 82.2 3000 PSI
AP 108 102 42.9 13 77.8 3 2" 90.0 3000 PSI
AP 110 114 50.8 13 88.9 3 2.1/2" 108.1 3000 PSI
AP 112 135 61.9 17 106.4 4 3" 130.6 3000 PSI
AP 114 152 69.9 17 120.7 4 3.1/2" 139.0 3000 PSI
AP 116 162 77.8 17 130.2 4 4" 152.0 3000 PSI
AP 118 184 92.1 17 152.4 4 5" 180.0 3000 PSI
AP 401 56 18.2 9 40.5 4 1/2" 47.2 6000 PSI
AP 402 71 23.8 11 50.8 4 3/4" 60.0 6000 PSI
AP 403 81 27.8 13 57.2 4 1" 69.6 6000 PSI
AP 404 95 31.8 15 66.7 4 1.1/4" 77.2 6000 PSI
AP 405 113 36.5 17 79.4 4 1.1/2" 95.0 6000 PSI
AP 406 133 44.5 21 96.8 4 2" 113.8 6000 PSI

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.