AFG JIC (3000 PSI)

SAE external thread flange

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE external thread flange
Material S355J2G3 (ST52.3)
Mounting Screw bore hole
Pressure series 3000 psi
Scope of supply flange only
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Size PB 10.9 bar H mm Ø B mm E mm L mm C mm M metr. D mm A M unc G mm F mm
Product Name Size PB 10.9 bar H mm Ø B mm E mm L mm C mm M metr. D mm A M unc G mm F mm
AFG 80 JIC 3/4 1/2" 350 13 9.9 17.5 9.0 38.1 M 8 x 30 54 UNF 3/4" -16 5/16" x 1.1/4" 52 46
AFG 80 JIC 7/8 1/2" 350 13 12.3 17.5 9.0 38.1 M 8 x 30 54 UNF 7/8" -14 3/8" x 1.1/4" 52 46
AFG 100 JIC 1 1/16 3/4" 350 14 15.5 22.2 11.5 47.6 M 10 x 30 65 UNF 1 1/16" -12 3/8" x 1.1/4" 60 50
AFG 102 JIC 1 5/16 1" 315 16 21.5 26.2 11.5 52.4 M 10 x 30 70 UN 1.5/16" -12 3/8" x 1.1/4" 63 55
AFG 104 JIC 1 5/16 1.1/4" 250 14 21.5 30.2 11.5 58.7 M 10 x 30 79 UN 1.5/16" -12 7/16" x 1.1/2" 65 68
AFG 104 JIC 1 5/8 1.1/4" 250 14 27.5 30.2 11.5 58.7 M 10 x 30 79 UN 1.5/8" -12 7/16" x 1.1/2" 65 68
AFG 106 JIC 1 7/8 1.1/2" 200 16 33.0 35.7 13.5 69.9 M 12 x 35 94 UN 1.7/8" -12 1/2" x 1.1/2" 70 78
PN = Nominal pressure PB = Max. operating pressure
Series: LL = Very light L = Light S = Heavy
Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.