AFG M (3000 PSI)

SAE external thread flange

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE external thread flange
Material S355J2G3 (ST52.3)
Mounting Screw bore hole
Pressure series 3000 psi
Scope of supply flange only
Standard DIN 3901/3902
Surface black oiled

Hints

In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Ø RAD mm Size PB 10.9 bar E mm L mm C mm Ø B mm M metr. A M unc I mm Series G1 mm
Product Name Ø RAD mm Size PB 10.9 bar E mm L mm C mm Ø B mm M metr. A M unc I mm Series G1 mm
AFG 80 M/L15 15 1/2" 315 17.5 9.0 38.1 12 M 8 x 30 M 22 x 1.5 5/16" x 1.1/4" 7.0 L 52
AFG 100 M/L22 22 3/4" 160 22.2 11.5 47.6 19 M 10 x 30 M 30 x 2 3/8" x 1.1/4" 7.5 L 60
AFG 100 M/S20 20 3/4" 345 22.2 11.5 47.6 16 M 10 x 30 M 30 x 2 3/8" x 1.1/4" 10.5 S 60
AFG 102 M/L22 22 1" 160 26.2 11.5 52.4 19 M 10 x 30 M 30 x 2 3/8" x 1.1/4" 7.5 L 63
AFG 102 M/L28 28 1" 160 26.2 11.5 52.4 24 M 10 x 30 M 36 x 2 3/8" x 1.1/4" 7.5 L 63
AFG 102 M/S20 20 1" 315 26.2 11.5 52.4 16 M 10 x 30 M 30 x 2 3/8" x 1.1/4" 10.5 S 63
AFG 102 M/S25 25 1" 315 26.2 11.5 52.4 20 M 10 x 30 M 36 x 2 3/8" x 1.1/4" 12.0 S 63
AFG 104 M/L28 28 1.1/4" 160 30.2 11.5 58.7 24 M 10 x 35 M 36 x 2 7/16" x 1.1/2" 7.5 L 65
AFG 104 M/L35 35 1.1/4" 160 30.2 11.5 58.7 29 M 10 x 35 M 45 x 2 7/16" x 1.1/2" 10.5 L 65
AFG 104 M/S30 30 1.1/4" 250 30.2 11.5 58.7 25 M 10 x 35 M 42 x 2 7/16" x 1.1/2" 13.5 S 65
AFG 106 M/L42 42 1.1/2" 160 35.7 13.5 69.9 36 M 12 x 35 M 52 x 2 1/2" x 1.1/2" 11.0 L 70
AFG 106 M/S38 38 1.1/2" 200 35.7 13.5 69.9 32 M 12 x 35 M 52 x 2 1/2" x 1.1/2" 16.0 S 70
PN = Nominal pressure PB = Max. operating pressure
Ø = External pipe diameter
Series: LL = Very light L = Light S = Heavy

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.