AFG M (6000 PSI)

SAE external thread flange

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE external thread flange
Material S355J2G3 (ST52.3)
Mounting Screw bore hole
Pressure series 6000 psi
Scope of supply flange only
Standard DIN 3901/3902
Surface black oiled

Hints

In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Ø RAD mm PB bar Size Ø B mm E mm A L mm M metr. C mm Series M unc G1 mm I mm
Product Name Ø RAD mm PB bar Size Ø B mm E mm A L mm M metr. C mm Series M unc G1 mm I mm
AFG 401 M/S16 16 400 1/2" 12 SAE external thread flange; flange only; S355J2G3 (ST52.3) 18.2 M 24 x 1.5 9.0 M 8 x 30 40.5 S 5/16" x 1.1/4" 60 8.5
AFG 402 M/S25 25 400 3/4" 19 SAE external thread flange; flange only; S355J2G3 (ST52.3) 23.8 M 36 x 2 11.5 M 10 x 35 50.8 S 3/8" x 1.1/2" 73 12.0
AFG 403 M/S30 30 400 1" 25 SAE external thread flange; flange only; S355J2G3 (ST52.3) 27.8 M 42 x 2 13.0 M 12 x 45 57.2 S 7/16" x 1.3/4" 82 13.5
AFG 404 M/S30 30 400 1.1/4" 25 SAE external thread flange; flange only; S355J2G3 (ST52.3) 31.8 M 42 x 2 15.0 M 14 x 50 66.7 S 1/2" x 1.3/4" 92 13.5
AFG 404 M/S38 38 400 1.1/4" 29 SAE external thread flange; flange only; S355J2G3 (ST52.3) 31.8 M 52 x 2 15.0 M 14 x 50 66.7 S 1/2" x 1.3/4" 92 16.0
AFG 405 M/S38 38 400 1.1/2" 32 SAE external thread flange; flange only; S355J2G3 (ST52.3) 36.5 M 52 x 2 17.5 M 16 x 50 79.4 S 5/8" x 2" 96 16.0
Ø RAD = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.