DSFS (6000 PSI)

SAE stub end flange connector

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE stub end flange connector
Material S355J2G3 (ST52.3)
Mounting with metric screw set
Pressure series 6000 psi
Scope of supply with 2 flange halves, screw set and O-ring
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name PB bar Pipe Size Ø B mm D mm E mm L mm M metr. C mm A mm G mm M unc F mm
Product Name PB bar Pipe Size Ø B mm D mm E mm L mm M metr. C mm A mm G mm M unc F mm
DSFS 6001-16 400 16 x 2 1/2" 12.0 56 18.2 8.5 M 8 x 30 40.5 16.0 68 5/16" x 1.1/4" 47.2
DSFS 6001-21.3 400 21.3 x 4.5 1/2" 11.9 56 18.2 8.5 M 8 x 30 40.5 21.3 68 5/16" x 1.1/4" 47.2
DSFS 6002-25 400 25 x 3.5 3/4" 18.0 71 23.8 10.5 M 10 x 35 50.8 25.0 76 3/8" x 1.1/2" 60.0
DSFS 6002-26.9 400 26.9 x 5.6 3/4" 15.7 71 23.8 10.5 M 10 x 35 50.8 26.9 76 3/8" x 1.1/2" 60.0
DSFS 6003-30 400 30 x 4 1" 22.0 81 27.8 13.5 M 12 x 45 57.2 30.0 80 7/16" x 1.3/4" 69.6
DSFS 6003-33.7 400 33.7 x 7.1 1" 19.0 81 27.8 13.5 M 12 x 45 57.2 34.0 80 7/16" x 1.3/4" 69.6
DSFS 6003-38 400 38 x 5 1" 28.0 81 27.8 13.5 M 12 x 45 57.2 38.0 80 7/16" x 1.3/4" 69.6
DSFS 6004-30 400 30 x 4 1.1/4" 22.0 95 31.8 14.5 M 14 x 50 66.7 30.0 90 1/2" x 1.3/4" 77.2
DSFS 6004-38 400 38 x 5.5 1.1/4" 27.0 95 31.8 14.5 M 14 x 50 66.7 38.0 90 1/2" x 1.3/4" 77.2
DSFS 6004-42.4 400 42.4 x 6.3 1.1/4" 29.8 95 31.8 14.5 M 14 x 50 66.7 42.4 90 1/2" x 1.3/4" 77.2
DSFS 6005-45 400 45 x 6.5 1.1/2" 32.0 113 36.5 16.7 M 16 x 55 79.4 45.0 100 5/8" x 2" 95.0
DSFS 6005-48.3 400 48.3 x 8.8 1.1/2" 30.7 113 36.5 16.7 M 16 x 55 79.4 50.0 100 5/8" x 2" 95.0
DSFS 6006-60.3 400 60.3 x 13.4 2" 33.7 133 44.5 21.0 M 20 x 75 96.8 60.3 116 3/4" x 2.1/2" 113.8
DSFS 6006-65 400 65 x 8 2" 46.0 133 44.5 21.0 M 20 x 75 96.8 65.0 116 3/4" x 2.1/2" 113.8
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.