BFK (6000 PSI)

SAE flare flange connector

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE flare flange connector
Material Flange: Steel C 45, flared part: 42CrMo4V
Mounting with metric screw set
Pressure series 6000 psi
Scope of supply with screw set, flare coupling and O-ring
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name D mm E mm L mm C mm Screws PB bar G mm Pipe A x X Size F mm I mm
Product Name D mm E mm L mm C mm Screws PB bar G mm Pipe A x X Size F mm I mm
BFK 402-25-3 71 23.8 11 50.8 (4x) M 10 x 60 400 75 25 mm x 3 mm 3/4" 60 16.5
BFK 402-25-4 71 23.8 11 50.8 (4x) M 10 x 60 400 75 25 mm x 4 mm 3/4" 60 16.5
BFK 403-30-4 81 27.8 13 57.2 (4x) M 12 x 70 400 85 30 mm x 4 mm 1" 71 17.4
BFK 403-30-5 81 27.8 13 57.2 (4x) M 12 x 70 400 85 30 mm x 5 mm 1" 71 17.4
BFK 404-38-5 95 31.8 15 66.7 (4x) M 14 x 80 400 88 38 mm x 5 mm 1.1/4" 81 18.4
BFK 404-38-6 95 31.8 15 66.7 (4x) M 14 x 80 400 88 38 mm x 6 mm 1.1/4" 81 18.4
BFK 405-50-6 114 36.5 17 79.4 (4x) M 16 x 90 400 114 50 mm x 6 mm 1.1/2" 96 20.6
BFK 405-50-8 114 36.5 17 79.4 (4x) M 16 x 90 400 114 50 mm x 8 mm 1.1/2" 96 20.6
BFK 406-65-8 134 44.5 21 96.8 (4x) M 20 x 120 400 130 65 mm x 8 mm 2" 114 22.4
PN = Nominal pressure
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.