AFC (3000/6000 PSI)

SAE sealing flange

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE sealing flange
Material S355J2G3 (ST52.3)
Mounting Screw bore hole
Scope of supply flange only
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name M metr. D mm M unc Size PB 10.9 bar Pressure series H mm E mm F mm L mm C mm L Footn
Product Name M metr. D mm M unc Size PB 10.9 bar Pressure series H mm E mm F mm L mm C mm L Footn
AFC 80 M 8 x 30 56 5/16" x 1.1/4" 1/2" 350 3000 PSI 16 17.5 48 9.0 38.1 -
AFC 100 M 10 x 35 65 3/8" x 1.1/2" 3/4" 350 3000 PSI 16 22.2 50 11.0 47.6 -
AFC 102 M 10 x 35 70 3/8" x 1.1/2" 1" 315 3000 PSI 19 26.2 60 11.0 52.4 -
AFC 104 M 10 x 40 79 7/16" x 1.1/2" 1.1/4" 250 3000 PSI 18 30.2 68 11.5 58.7 -
AFC 106 M 12 x 45 93 7/16" x 1.1/2" 1.1/2" 200 3000 PSI 20 35.7 78 13.5 69.9 -
AFC 108 M 12 x 45 102 7/16" x 1.1/2" 2" 200 3000 PSI 20 42.9 90 13.5 77.8 -
AFC 110 M 12 x 45 114 7/16" x 1.1/2" 2.1/2" 160 3000 PSI 20 50.8 105 13.5 88.9 -
AFC 112 M 16 x 50 134 5/8" x 2" 3" 138 3000 PSI 24 61.9 124 17.5 106.4 -
AFC 114 M 16 x 50 152 5/8" x 2" 3.1/2" 35 3000 PSI 22 69.9 136 17.5 120.7 -
AFC 116 M 16 x 50 162 5/8" x 2" 4" 35 3000 PSI 25 77.8 146 17.5 130.2 -
AFC 118 M 16 x 50 190 5/8" x 2" 5" 35 3000 PSI 28 92.1 170 17.5 152.4 -
AFC 401 M 8 x 30 56 5/16" x 1.1/4" 1/2" 400 6000 PSI 16 18.2 48 9.0 40.5 -
AFC 402 M 10 x 35 71 3/8" x 1.1/2" 3/4" 400 6000 PSI 19 23.8 60 11.0 50.8 -
AFC 403 M 12 x 45 81 7/16" x 1.1/2" 1" 400 6000 PSI 24 27.8 70 13.0 57.2 -
AFC 404 M 14 x 45 95 1/2" x 1.3/4" 1.1/4" 400 6000 PSI 27 31.8 78 - 66.7 = 15.0 for metric screws; 13.5 for UNC screws
AFC 405 M 16 x 50 112 5/8" x 2" 1.1/2" 400 6000 PSI 30 36.5 94 17.0 79.4 -
AFC 406 M 20 x 65 134 3/4" x 2.1/2" 2" 400 6000 PSI 28 44.5 114 21.0 96.8 -
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.