GFC (3000/6000 PSI)

SAE sealing counter flange

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE sealing counter flange
Material S355J2G3 (ST52.3)
Mounting Inner thread for metric screws
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name M metr. D mm Size PB 10.9 bar Pressure series H mm E mm F mm C mm
Product Name M metr. D mm Size PB 10.9 bar Pressure series H mm E mm F mm C mm
GFC 80 M 8 56 1/2" 350 3000 PSI 16 17.5 48 38.1
GFC 100 M 10 65 3/4" 350 3000 PSI 16 22.2 50 47.6
GFC 102 M 10 70 1" 315 3000 PSI 19 26.2 60 52.4
GFC 104 M 10 79 1.1/4" 250 3000 PSI 18 30.2 68 58.7
GFC 106 M 12 93 1.1/2" 200 3000 PSI 20 35.7 78 69.9
GFC 108 M 12 102 2" 200 3000 PSI 20 42.9 90 77.8
GFC 110 M 12 114 2.1/2" 160 3000 PSI 20 50.8 105 88.9
GFC 112 M 16 134 3" 138 3000 PSI 24 61.9 124 106.4
GFC 114 M 16 152 3.1/2" 35 3000 PSI 22 69.9 136 120.7
GFC 116 M 16 162 4" 35 3000 PSI 25 77.8 146 130.2
GFC 118 M 16 190 5" 35 3000 PSI 28 92.1 170 152.4
GFC 401 M 8 56 1/2" 400 6000 PSI 16 18.2 48 40.5
GFC 402 M 10 71 3/4" 400 6000 PSI 19 23.8 60 50.8
GFC 403 M 12 81 1" 400 6000 PSI 24 27.8 70 57.2
GFC 404 M 14 95 1.1/4" 400 6000 PSI 27 31.8 78 66.7
GFC 405 M 16 112 1.1/2" 400 6000 PSI 30 36.5 94 79.4
GFC 406 M 20 134 2" 400 6000 PSI 28 44.5 114 96.8
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.