GAF (6000 PSI)

SAE reduction

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE reduction
Material S355J2G3 (ST52.3)
Pressure series 6000 psi
Scope of supply flange only
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name C1 mm E1 mm Screws PB bar H mm Size D mm L mm M metr. A mm E2 mm F mm C2 mm
Product Name C1 mm E1 mm Screws PB bar H mm Size D mm L mm M metr. A mm E2 mm F mm C2 mm
GAF 602-602 50.8 23.8 M 10 x 35 400 28 3/4" x 3/4" 70 11 M 10 19 23.8 70 50.8
GAF 603-602 57.2 27.8 M 12 x 40 400 30 1" x 3/4" 80 13 M 10 19 23.8 70 50.8
GAF 603-603 57.2 27.8 M 12 x 45 400 36 1" x 1" 80 13 M 12 25 27.8 75 57.2
GAF 604-603 68.7 31.8 M 14 x 40 400 25 1.1/4" x 1" 100 15 M 12 23 27.8 83 57.2
GAF 604-604 68.7 31.8 M 14 x 50 400 35 1.1/4" x 1.1/4" 100 15 M 14 31 31.8 90 68.7
GAF 605-604 79.3 36.5 M 16 x 55 400 48 1.1/2" x 1.1/4" 113 17 M 14 32 31.8 95 66.6
GAF 605-605 79.4 36.5 M 16 x 55 400 50 1.1/2" x 1.1/2" 113 17 M 16 38 36.5 113 79.4
PN = Nominal pressure
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.