AFS T (3000/6000 PSI)

SAE screw-in flange, UN/UNF

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE screw-in flange
Material S355J2G3 (ST52.3)
Mounting Screw bore hole
Scope of supply flange only
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name PB bar H mm Size Ø B mm Pressure series D mm E mm A L mm C mm G mm F mm I mm L Footn M metr.
Product Name PB bar H mm Size Ø B mm Pressure series D mm E mm A L mm C mm G mm F mm I mm L Footn M metr.
AFS 80 T 350 16 1/2" 13 3000 PSI SAE screw-in flange, UN/UNF; flange only; S355J2G3 (ST52.3) 54 17.5 UNF 3/4" -16 9.0 38.1 36 46 17 - -
AFS 100 T 350 18 3/4" 19 3000 PSI SAE screw-in flange, UN/UNF; flange only; S355J2G3 (ST52.3) 65 22.3 UNF 1 1/16" -12 11.0 47.6 36 50 23 - -
AFS 102 T 315 18 1" 25 3000 PSI SAE screw-in flange, UN/UNF; flange only; S355J2G3 (ST52.3) 70 26.2 UN 1.5/16" -12 11.0 52.4 38 55 23 - -
AFS 104 T 250 21 1.1/4" 32 3000 PSI SAE screw-in flange, UN/UNF; flange only; S355J2G3 (ST52.3) 79 30.2 UN 1.5/8" -12 11.5 58.7 41 68 23 - -
AFS 106 T 200 25 1.1/2" 38 3000 PSI SAE screw-in flange, UN/UNF; flange only; S355J2G3 (ST52.3) 93 35.7 UN 1.7/8" -12 13.5 69.9 45 78 23 - -
AFS 401 T 400 16 1/2" 13 6000 PSI SAE screw-in flange, UN/UNF; flange only; S355J2G3 (ST52.3) 54 18.2 UNF 3/4" -16 9.0 40.5 36 46 17 - -
AFS 402 T 400 21 3/4" 19 6000 PSI SAE screw-in flange, UN/UNF; flange only; S355J2G3 (ST52.3) 71 23.8 UNF 1 1/16" -12 11.0 50.8 35 55 23 - -
AFS 403 T 400 25 1" 25 6000 PSI SAE screw-in flange, UN/UNF; flange only; S355J2G3 (ST52.3) 81 27.8 UN 1.5/16" -12 13.0 57.2 42 65 23 - -
AFS 404 T 400 27 1.1/4" 32 6000 PSI SAE screw-in flange, UN/UNF; flange only; S355J2G3 (ST52.3) 95 31.8 UN 1.5/8" -12 - 66.7 45 78 23 = 15.0 for metric screws; 13.5 for UNC screws -
AFS 405 T 400 30 1.1/2" 38 6000 PSI SAE screw-in flange, UN/UNF; flange only; S355J2G3 (ST52.3) 112 36.5 UN 1.7/8" -12 17.0 79.4 50 94 23 - M 16 x 55
PN = Nominal pressure
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.