AFC S (3000 PSI)

SAE socket weld flange, ND 40

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Construction type ND 40
Design SAE socket weld flange
Material S355J2G3 (ST52.3)
Mounting Screw bore hole
Pressure series 3000 psi
Scope of supply flange only
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Size PB 10.9 bar Pipe E mm L mm C mm Ø B mm M metr. D mm A mm G mm F mm I mm
Product Name Size PB 10.9 bar Pipe E mm L mm C mm Ø B mm M metr. D mm A mm G mm F mm I mm
AFC 80 S 1/2" 40 22 x 2 17.5 9.0 38.1 15 M 8 x 25 56 22.5 10 46 3
AFC 100 S 3/4" 40 28 x 2 22.2 11.0 47.6 20 M 10 x 30 65 28.5 12 50 4
AFC 102 S 1" 40 35 x 2 26.2 11.0 52.4 29 M 10 x 30 70 35.5 12 55 4
AFC 104 S 1.1/4" 40 42 x 2 30.2 11.5 58.7 34 M 10 x 30 79 42.5 12 68 4
AFC 106 S 1.1/2" 40 48.3 x 3.25 35.7 13.5 69.9 42 M 12 x 35 93 49.0 15 78 4
AFC 108 S 2" 40 60.3 x 3.65 42.9 13.5 77.8 53 M 12 x 35 102 61.0 15 90 4
AFC 110 S 2.1/2" 40 76.1 x 3.65 50.8 13.5 88.9 64 M 12 x 35 114 77.0 15 105 4
AFC 112 S 3" 40 88.9 x 4.05 61.9 17.5 106.4 80 M 16 x 40 134 90.0 20 124 5
AFC 114 S 3.1/2" 35 101.6 x 4.5 69.9 17.5 120.7 93 M 16 x 40 152 103.0 20 136 5
AFC 116 S 4" 35 114.3 x 4.5 77.8 17.5 130.2 105 M 16 x 45 162 116.0 25 146 6
AFC 118 S 5" 35 139.7 x 4.85 92.1 17.5 152.4 126 M 16 x 45 190 141.0 28 170 8
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.