GFC S (3000 PSI)

SAE socket weld counter flange, ND 40

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Construction type ND 40
Design SAE socket weld counter flange
Material S355J2G3 (ST52.3)
Mounting Inner thread for metric screws
Pressure series 3000 psi
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name M metr. D mm Size PB 10.9 bar A mm G mm Pipe E mm F mm C mm Ø B mm I mm
Product Name M metr. D mm Size PB 10.9 bar A mm G mm Pipe E mm F mm C mm Ø B mm I mm
GFC 80 S M 8 56 1/2" 40 22.5 10 22 x 2 17.5 46 38.1 15 3
GFC 100 S M 10 65 3/4" 40 28.5 12 28 x 2 22.2 50 47.6 20 4
GFC 102 S M 10 70 1" 40 35.5 12 35 x 2 26.2 55 52.4 29 4
GFC 104 S M 10 79 1.1/4" 40 42.5 12 42 x 2 30.2 68 58.7 34 4
GFC 106 S M 12 93 1.1/2" 40 42.0 15 48.3 x 3.25 35.7 78 69.9 42 4
GFC 108 S M 12 102 2" 40 61.0 15 60.3 x 3.65 42.9 90 77.8 53 4
GFC 110 S M 12 114 2.1/2" 40 77.0 15 76.1 x 3.65 50.8 105 88.9 64 4
GFC 112 S M 16 134 3" 40 90.0 20 88.9 x 4.05 61.9 124 106.4 80 5
GFC 114 S M 16 152 3.1/2" 35 103.0 20 101.6 x 4.5 69.9 136 120.7 93 5
GFC 116 S M 16 162 4" 35 116.0 25 114.3 x 4.5 77.8 146 130.2 105 6
GFC 118 S M 16 190 5" 35 141.0 28 139.7 x 4.85 92.1 170 152.4 126 8
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.