SFS (3000 PSI)

SAE stub end

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE stub end
Material S355J2G3 (ST52.3)
Pressure series 3000 psi
Scope of supply short stub end only
Standard SAE J 518 C
ISO 6162

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Size PB 10.9 bar Ø B mm Pipe E mm L mm C mm M metr. D mm M unc A mm G mm F mm L Footn M metr. Footn
Product Name Size PB 10.9 bar Ø B mm Pipe E mm L mm C mm M metr. D mm M unc A mm G mm F mm L Footn M metr. Footn
SFS 3001 S 16 1/2" 350 12.0 16 x 2 17.5 8.5 38.1 M 8 x 30 54 5/16" x 1.1/4" 16.0 41 45.6 - -
SFS 3001-21.3 1/2" 350 15.5 21.3 x 4.7 17.5 8.5 38.1 M 8 x 30 54 5/16" x 1.1/4" 22.0 41 45.6 - -
SFS 3002-25 3/4" 350 18.9 25 x 3 22.2 10.5 47.6 M 10 x 30 65 3/8" x 1.1/4" 27.0 50 51.8 - -
SFS 3002-26.9 3/4" 350 18.9 26.9 x 3.9 22.2 10.5 47.6 M 10 x 30 65 3/8" x 1.1/4" 27.0 50 51.8 - -
SFS 3003-28 1" 315 22.0 28 x 3 26.2 10.5 52.4 M 10 x 35 70 3/8" x 1.1/4" 28.0 50 58.4 - -
SFS 3003-30 1" 315 22.0 30 x 4 26.2 10.5 52.4 M 10 x 35 70 3/8" x 1.1/4" 30.0 50 58.4 - -
SFS 3003-33.7 1" 315 24.7 33.7 x 4.5 26.2 10.5 52.4 M 10 x 35 70 3/8" x 1.1/4" 35.0 50 58.4 - -
SFS 3003-38 1" 315 28.0 38 x 5 26.2 10.5 52.4 M 10 x 35 70 3/8" x 1.1/4" 38.0 50 58.4 - -
SFS 3004-38 1.1/4" 250 28.0 38 x 5 30.2 - 58.7 *2 79 7/16" x 1.1/2" 38.0 55 72.6 = Choice of 10.5 or 12.5 = Choice of M 10 x 30 or M 12 x 35
SFS 3004-42.4 1.1/4" 250 29.7 42.4 x 6.3 30.2 - 58.7 *2 79 7/16" x 1.1/2" 43.0 55 72.6 = Choice of 10.5 or 12.5 = Choice of M 10 x 30 or M 12 x 35
SFS 3005-38 1.1/2" 200 30.0 38 x 4 35.7 13.5 69.9 M 12 x 35 94 1/2" x 1.1/2" 38.0 57 82.2 - -
SFS 3005-42 1.1/2" 200 32.0 42 x 5 35.7 13.5 69.9 M 12 x 35 94 1/2" x 1.1/2" 42.0 57 82.2 - -
SFS 3005-45 1.1/2" 200 35.0 45 x 5 35.7 13.5 69.9 M 12 x 35 94 1/2" x 1.1/2" 45.0 57 82.2 - -
SFS 3005-48.3 1.1/2" 200 34.0 48.3 x 7.1 35.7 13.5 69.9 M 12 x 35 94 1/2" x 1.1/2" 49.0 57 82.2 - -
SFS 3006-55 2" 200 45.0 55 x 5 42.9 13.5 77.8 M 12 x 35 102 1/2" x 1.1/2" 55.0 57 96.4 - -
SFS 3006-60.3 2" 200 44.0 60.3 x 8 42.9 13.5 77.8 M 12 x 35 102 1/2" x 1.1/2" 60.3 57 96.4 - -
SFS 3007-65 2.1/2" 160 53.0 65 x 6 50.8 13.5 88.9 M 12 x 40 114 1/2" x 1.3/4" 65.0 58 108.2 - -
SFS 3007-70 2.1/2" 160 55.0 70 x 7.5 50.8 13.5 88.9 M 12 x 40 114 1/2" x 1.3/4" 70.0 58 108.2 - -
SFS 3007-76.1 2.1/2" 160 62.0 76.1 x 7.1 50.8 13.5 88.9 M 12 x 40 114 1/2" x 1.3/4" 74.0 58 108.2 - -
SFS 3008-80 3" 138 68.0 80 x 6 61.9 16.7 106.4 M 16 x 45 135 5/8" x 2" 80.0 60 130.6 - -
SFS 3008-88.9 3" 138 73.0 88.9 x 8 61.9 16.7 106.4 M 16 x 45 135 5/8" x 2" 90.0 60 130.6 - -
SFS 3009-100 3.1/2" 35 88.0 100 x 6 69.9 17.0 120.7 M 16 x 45 152 5/8" x 2" 100.0 60 139.0 - -
SFS 3009-88.9 3.1/2" 35 73.0 88.9 x 8 69.9 17.0 120.7 M 16 x 45 152 5/8" x 2" 90.0 60 139.0 - -
SFS 3010-110 4" 35 98.0 110 x 6 77.8 17.0 130.2 M 16 x 50 162 5/8" x 2" 110.0 60 152.0 - -
SFS 3010-114.3 4" 35 96.7 114.3 x 8.8 77.8 17.0 130.2 M 16 x 50 162 5/8" x 2" 115.0 60 152.0 - -
SFS 3011-133 5" 35 120.0 133 x 6.5 92.1 17.0 152.4 M 16 x 50 184 5/8" x 2" 133.0 60 180.0 - -
SFS 3011-139.7 5" 35 120.0 139.7 x 10 92.1 17.0 152.4 M 16 x 50 184 5/8" x 2" 140.0 60 180.0 - -
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.