SFS (6000 PSI)

SAE stub end

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE stub end
Material S355J2G3 (ST52.3)
Pressure series 6000 psi
Scope of supply short stub end only
Standard SAE J 518 C
ISO 6162

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB bar Pipe Size Ø B mm D mm E mm L mm M metr. C mm A mm G mm M unc F mm L Footn
Product Name PB bar Pipe Size Ø B mm D mm E mm L mm M metr. C mm A mm G mm M unc F mm L Footn
SFS 6001-16 400 16 x 2 1/2" 12.0 SAE stub end; short stub end only; S355J2G3 (ST52.3) 56 18.2 8.5 M 8 x 30 40.5 16.0 34 5/16" x 1.1/4" 47.2 -
SFS 6001-21.3 400 21.3 x 4.5 1/2" 11.9 SAE stub end; short stub end only; S355J2G3 (ST52.3) 56 18.2 8.5 M 8 x 30 40.5 21.3 34 5/16" x 1.1/4" 47.2 -
SFS 6002-20 400 20 x 2.5 3/4" 15.0 SAE stub end; short stub end only; S355J2G3 (ST52.3) 71 23.8 10.5 M 10 x 35 50.8 20.0 38 3/8" x 1.1/2" 60.0 -
SFS 6002-25 400 25 x 3.5 3/4" 18.0 SAE stub end; short stub end only; S355J2G3 (ST52.3) 71 23.8 10.5 M 10 x 35 50.8 25.0 38 3/8" x 1.1/2" 60.0 -
SFS 6002-26.9 400 26.9 x 5.6 3/4" 15.7 SAE stub end; short stub end only; S355J2G3 (ST52.3) 71 23.8 10.5 M 10 x 35 50.8 26.9 38 3/8" x 1.1/2" 60.0 -
SFS 6003-30 400 30 x 4 1" 22.0 SAE stub end; short stub end only; S355J2G3 (ST52.3) 81 27.8 - M 12 x 45 57.2 30.0 40 7/16" x 1.3/4" 69.6 = Choice of 12.0 or 12.5
SFS 6003-33.7 400 33.7 x 7.1 1" 19.0 SAE stub end; short stub end only; S355J2G3 (ST52.3) 81 27.8 - M 12 x 45 57.2 35.0 40 7/16" x 1.3/4" 69.6 = Choice of 12.0 or 12.5
SFS 6003-38 400 38 x 5 1" 28.0 SAE stub end; short stub end only; S355J2G3 (ST52.3) 81 27.8 - M 12 x 45 57.2 38.0 40 7/16" x 1.3/4" 69.6 = Choice of 12.0 or 12.5
SFS 6004-38 400 38 x 5.5 1.1/4" 27.0 SAE stub end; short stub end only; S355J2G3 (ST52.3) 95 31.8 - M 14 x 50 66.7 38.0 45 1/2" x 1.3/4" 77.2 = Choice of 13.5 or 14.5
SFS 6004-42.4 400 42.4 x 6.3 1.1/4" 29.8 SAE stub end; short stub end only; S355J2G3 (ST52.3) 95 31.8 14.5 M 14 x 50 66.7 42.4 45 1/2" x 1.3/4" 77.2 -
SFS 6005-45 400 45 x 6.5 1.1/2" 32.0 SAE stub end; short stub end only; S355J2G3 (ST52.3) 113 36.5 16.7 M 16 x 55 79.4 45.0 50 5/8" x 2" 95.0 -
SFS 6005-48.3 400 48.3 x 8.8 1.1/2" 30.7 SAE stub end; short stub end only; S355J2G3 (ST52.3) 113 36.5 17.0 M 16 x 55 79.4 48.3 50 5/8" x 2" 95.0 -
SFS 6006-65 400 65 x 8 2" 49.0 SAE stub end; short stub end only; S355J2G3 (ST52.3) 133 44.5 21.0 M 20 x 70 96.8 65.0 58 3/4" x 2.1/2" 113.8 -
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.