AFS SRE (3000 PSI)

SAE stub end

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design SAE stub end
Material S355J2G3 (ST52.3)
Mounting Screw bore hole
Pressure series 3000 psi
Scope of supply flange only
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB bar Pipe H mm Size E mm L mm M metr. C mm A mm G mm M unc B2 mm B1 mm
Product Name PB bar Pipe H mm Size E mm L mm M metr. C mm A mm G mm M unc B2 mm B1 mm
AFS 80 SRE 20 350 20 x 3 16.0 1/2" SAE stub end; flange only; S355J2G3 (ST52.3) 17.5 9.0 M 8 x 30 38.1 20 35.0 5/16" x 1.1/4" 14 14.0
AFS 80 SRE 22 350 22 x 3 16.0 1/2" SAE stub end; flange only; S355J2G3 (ST52.3) 17.5 9.0 M 8 x 30 38.1 22 35.0 5/16" x 1.1/4" 13 16.0
AFS 100 SRE 25 350 25 x 3 18.0 3/4" SAE stub end; flange only; S355J2G3 (ST52.3) 22.2 11.0 M 10 x 35 47.6 25 36.0 3/8" x 1.1/2" 19 19.0
AFS 100 SRE 28 350 28 x 3 18.0 3/4" SAE stub end; flange only; S355J2G3 (ST52.3) 22.2 11.0 M 10 x 35 47.6 28 36.0 3/8" x 1.1/2" 19 21.5
AFS 102 SRE 30 315 30 x 4 18.0 1" SAE stub end; flange only; S355J2G3 (ST52.3) 26.2 11.0 M 10 x 35 52.4 30 38.0 3/8" x 1.1/2" 22 22.0
AFS 102 SRE 35 315 35 x 4 18.0 1" SAE stub end; flange only; S355J2G3 (ST52.3) 26.2 11.0 M 10 x 35 52.4 35 38.0 3/8" x 1.1/2" 25 27.0
AFS 104 SRE 38 250 38 x 4 21.0 1.1/4" SAE stub end; flange only; S355J2G3 (ST52.3) 30.2 11.5 M 10 x 40 58.7 38 41.0 7/16" x 1.1/2" 30 30.0
AFS 104 SRE 42 250 42 x 3 21.0 1.1/4" SAE stub end; flange only; S355J2G3 (ST52.3) 30.2 11.5 M 10 x 40 58.7 43 41.0 7/16" x 1.1/2" 31 36.0
AFS 106 SRE 38 200 38 x 4 25.0 1.1/2" SAE stub end; flange only; S355J2G3 (ST52.3) 35.7 13.5 M 12 x 45 69.9 38 44.0 1/2" x 1.3/4" 30 30.0
AFS 106 SRE 42 200 42 x 3 25.0 1.1/2" SAE stub end; flange only; S355J2G3 (ST52.3) 35.7 13.5 M 12 x 45 69.9 42 44.0 1/2" x 1.3/4" 36 36.0
AFS 106 SRE 48.3 200 48.3 x 4.5 25.0 1.1/2" SAE stub end; flange only; S355J2G3 (ST52.3) 35.7 13.5 M 12 x 45 69.9 49 44.0 1/2" x 1.3/4" 38 38.0
AFS 108 SRE 60 200 60.3 x 5.6 25.0 2" SAE stub end; flange only; S355J2G3 (ST52.3) 42.9 13.5 M 12 x 45 77.8 61 45.0 1/2" x 1.3/4" 49 49.0
AFS 110 SRE 76 160 76.1 x 7.1 25.0 2.1/2" SAE stub end; flange only; S355J2G3 (ST52.3) 50.8 13.5 M 12 x 45 88.9 77 50.0 1/2" x 1.3/4" 62 62.0
AFS 112 SRE 76 160 76.1 x 7.1 26.0 3" SAE stub end; flange only; S355J2G3 (ST52.3) 61.9 17.5 M 16 x 50 106.4 77 51.0 5/8" x 2" 62 62.0
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.