GFS STRE (3000 PSI)

SAE welded on counter flange

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Construction type ND 40
Design SAE welded on counter flange
Material S355J2G3 (ST52.3)
Mounting Inner thread for metric screws
Pressure series 3000 psi
Standard SAE J 518 C
ISO 6162
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name PB bar Pipe H mm Size D mm E mm M metr. C mm A mm G mm B2 mm F mm B1 mm
Product Name PB bar Pipe H mm Size D mm E mm M metr. C mm A mm G mm B2 mm F mm B1 mm
GFS 80 STRE 21.3 350 21.3 x 2.6 16.0 1/2" 54 17.5 M 8 38.1 22.0 35.0 13 46 16.0
GFS 100 STRE 26.9 350 26.9 x 2.6 18.0 3/4" 65 22.2 M 10 47.6 28.0 35.0 19 50 21.5
GFS 102 STRE 33.7 315 33.7 x 3.2 18.0 1" 70 26.2 M 10 52.4 35.0 38.0 25 55 27.0
GFS 104 STRE 42.4 250 42.4 x 3.2 21.0 1.1/4" 79 30.2 M 10 58.7 43.0 41.0 31 68 36.0
GFS 106 STRE 48.3 200 48.3 x 3.2 25.0 1.1/2" 93 35.7 M 12 69.9 49.0 44.0 38 78 42.0
GFS 108 STRE 48.3 200 48.3 x 3.2 25.0 2" 102 42.9 M 12 77.8 49.0 45.0 42 90 42.0
GFS 108 STRE 60.3 200 60.3 x 3.6 25.0 2" 102 42.9 M 12 77.8 61.0 45.0 49 90 53.0
GFS 110 STRE 60.3 160 60.3 x 3.6 25.0 2.1/2" 114 50.8 M 12 88.9 61.0 50.0 53 105 53.0
GFS 110 STRE 76.1 160 76.1 x 3.6 25.0 2.1/2" 114 50.8 M 12 88.9 77.0 50.0 62 105 70.0
GFS 112 STRE 88.9 138 88.9 x 3.6 26.0 3" 134 61.9 M 16 106.4 90.0 51.0 74 124 82.0
GFS 114 STRE 76.1 35 76.1 x 3.6 26.0 3.1/2" 152 69.9 M 16 120.7 77.0 48.0 70 136 70.0
GFS 114 STRE 88.9 35 88.9 x 3.6 26.0 3.1/2" 152 69.9 M 16 120.7 90.0 48.0 82 136 82.0
GFS 116 STRE 114 35 114.3 x 3.6 26.0 4" 162 77.8 M 16 130.2 115.0 48.0 102 146 107.0
GFS 116 STRE 88.9 35 88.9 x 3.6 26.0 4" 162 77.8 M 16 130.2 90.0 48.0 82 146 82.0
GFS 118 STRE 139 35 139.7 x 4 28.0 5" 184 92.1 M 16 152.4 140.2 50.0 120 180 131.0
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.