HD 700 (R15)

HD hose

  • Image_1 Image_1

Properties

Application area High pressure circuits with high loads
hydrostatic gearboxes
Shipbuilding
Mining and opencast mining
Colour black
Elongation + 2 % to - 2 %
Inner layer oil resistant synthetic rubber
Insert four (up to NW 25) or six (from NW 32) high tensile steel wire spirals
Media Mineral oil
Mineral oil
Water (0°C to + 70°C)
Water-oil emulsions
Outer layer synthetic rubber with high temperature, ozone and abrasion resistance
Standard SAE 100 R 15
Temp. max. 121 °C
Temp. min. -40 °C

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm DN* Test pressure bar Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm DN* Test pressure bar Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
HD 716 28.5 15.9 16 900 450 5/8" 1850 10 180
HD 720 32.0 19.0 19 840 420 3/4" 1680 12 265
HD 725 38.2 25.4 25 840 420 1" 1680 16 330
HD 732 50.0 31.8 31 840 420 1.1/4" 1680 20 445
HD 740 57.3 38.1 38 840 420 1.1/2" 1680 24 530
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.