NY 1800

Thermoplastic high pressure hose

  • Image_1 Image_1

Properties

Application area General application, e.g. in industry, construction machinery, agricultural technology etc.
Automotive engineering
Colour black
Inner layer Polyester elastomer
Insert one aramide braided insert
Media Mineral oil
Polyglycol based oil
Water (0°C to + 60°C)
Water-oil emulsions (up to 60‏°C)
Temp. max. 100 °C
Temp. min. -55 °C

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm DN* Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm DN* Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
NY 1806 13.0 6.5 6 250 1/4" 1000 4 35
NY 1808 15.0 8.1 8 250 5/16" 1000 5 45
NY 1804 9.6 5.0 5 250 3/16" 1000 3 25
NY 1810 18.0 9.7 10 250 3/8" 1000 6 55

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.