NYZ 700 (R7)

Thermoplastic high pressure twin hose

  • Image_1 Image_1

Properties

Application area medium high pressure systems
Forklift trucks
Lubrication line
Colour black
Elongation + 3 % to - 3 %
Inner layer NW 4 - 13: Polyester elastomer; from NW 16: Polyamide
Insert two high tensile polyester braided inserts
Media Mineral oil
ASTM1
ASTM3
Polyglycol based oil
Synthetic oils
Water (0°C to + 60°C)
Water-oil emulsions (up to 60‏°C)
Outer layer Polyurethane (PUR)
Special features high ozone and abrasion resistance
no swelling or brittleness when used with solvents or alkaline media
Twin hose
very good reverse bending fatigue strength
slight volumetric expansion
Standard SAE 100 R 7
Temp. max. 100 °C
Temp. min. -40 °C

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm DN* Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm DN* Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
NYZ 704 9.6 5.0 5 210 3/16" 840 3 25
NYZ 706 12.2 6.5 6 210 1/4" 840 4 35
NYZ 708 14.3 8.1 8 190 5/16" 760 5 45
NYZ 710 16.0 9.7 10 160 3/8" 640 6 55
NYZ 713 20.3 13.0 12 140 1/2" 560 8 95
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.