NYZ 800 (R8)

Thermoplastic high pressure twin hose

  • Image_1 Image_1

Properties

Application area High pressure circuits
general application
Colour black
Elongation + 3 % to - 3 %
Inner layer Polyester elastomer
Insert one aramide braided insert
Media Mineral oil
Applications with gaseous or chemical media
Synthetic oils
Water (0°C to + 60°C)
Water-oil emulsions (up to 60‏°C)
Outer layer Polyurethane (PUR)
Special features high ozone and abrasion resistance
no swelling or brittleness when used with solvents or alkaline media
Twin hose
very good reverse bending fatigue strength
slight volumetric expansion
Standard SAE 100 R 8, BS 4983, ISO 3949
Temp. max. 100 °C
Temp. min. -40 °C

Hints

The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm DN* Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm DN* Operating pressure bar Inches Burst pressure bar Size Min. bending radius mm
NYZ 804 8.9 5.0 5 350 3/16" 1400 3 30
NYZ 806 11.5 6.5 6 350 1/4" 1400 4 50
NYZ 808 13.4 8.1 8 300 5/16" 1200 5 55
NYZ 810 15.5 9.7 10 280 3/8" 1120 6 60
NYZ 813 19.9 13.0 12 245 1/2" 960 8 80
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.