TBF 200 CU

HD hose, type TBF, copper braid

  • Image_1 Image_1

Properties

Application area Electrically conductive paint spraying hose with high flexibility and low weight
Colour black
Elongation + 3 % to - 1 %
Inner layer Polyamid (PA)
Insert two polyester braided inserts with interwoven copper braid for dissipating electrostatic charge
Media Resistant to many technical media
particularly the paints and solvents used in paint spraying
Outer layer NW 4: Polyamide; from NW 6: Polyurethane
Special features with copper braid
favourable flow properties
high resistance to light, weathering, aging, chemical media
Temp. max. 80 °C
Temp. min. -60 °C

Hints

Fitting with press-fit and screw connections.
The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402.
Paint spraying hoses are subject to the guidelines for liquid jet equipment (ZH 1-406) by the employers’ liability insurance association. Follow these guidelines when fitting.

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm BD* at 80°C bar DN* BD* at 50°C bar BD* at 20 °C bar Inches Size Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm BD* at 80°C bar DN* BD* at 50°C bar BD* at 20 °C bar Inches Size Min. bending radius mm
TBF 204 CU 9.2 4.0 HD hose, type TBF, copper braid 380 4 425 485.0 3/16" 3 40
TBF 206 CU 13.0 6.3 HD hose, type TBF, copper braid 360 6 400 455.0 1/4" 4 63
DN = Nominal diameter, nominal width
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.