CHEM EPDM

Chemical supply hose

  • Image_1 Image_1

Properties

Application area chemical industries
Sea and industrial waste water
Colour black
Inner layer chemical resistant, black, smooth EPDM rubber
Insert two highly resistant textile inserts and two antistatic copper braids
Outer layer abrasion resistant, flame-retardant, ozone and weather resistant CR rubber
Special features suitable for use as pressure hose in the chemical industry
Standard DIN EN 12115
Temp. range min. flexible to -35°C
max. depending on the medium 95°C
Temperature peaks up to 120°C

Hints

Dampfreinigung drucklos bis 130°C (max. 30 min)

Article Table

Product Name Internal Ø nom. mm Unit Roll length m Operating pressure bar only per spool External Ø mm Inches Burst pressure bar Min. bending radius mm
Product Name Internal Ø nom. mm Unit Roll length m Operating pressure bar only per spool External Ø mm Inches Burst pressure bar Min. bending radius mm
CHEM 19-6 EPDM 19.0 Reel 40 16 Yes 31 3/4" 64 80
CHEM 25-6 EPDM 25.4 Reel 40 16 Yes 37 1" 64 100
CHEM 32-6 EPDM 32.0 Reel 40 16 Yes 44 1.1/4" 64 125
CHEM 38-6.5 EPDM 38.0 Meter 40 16 No 51 1.1/2" 64 175
CHEM 51-8 EPDM 50.8 Meter 40 16 No 67 2" 64 225
CHEM 63-8 EPDM 63.5 Meter 40 16 No 79 2.1/2" 64 300
CHEM 76-8 EPDM 76.2 Meter 40 16 No 92 3" 64 350
CHEM 102-8 EPDM 101.6 Reel 40 16 Yes 118 4" 64 450

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.