CHEM TEFLON

Chemieförderschlauch

  • Image_1 Image_1

Properties

Application area chemical industries
Approval FDA 21 CFR 177.2600
USP XXXII class VI
ISO 10993 Sections 5,10,11:2009
3A Sanitary Standard Class II
Colour black
Inner layer PTFE (polytetrafluoroethylene)
Insert Synthetic textile inserts, zinc plated steel wire spirals, copper braids
Outer layer smooth
EPDM
resistant to wear, aging and ozone
patterned material
stoffgemustert
Special features Phthalate-free tested in accordance with 1907/2006 / EC (REACH)
Vacuum-resistant 675 mmHg (26.6 inHg)
Type Ω/T in accordance with EN 12115 ( R;106 Ω)
Standard EN 12115, TRBF131 Part 2
Temp. max. 150 °C
Temp. min. -40 °C

Article Table

Product Name Internal Ø nom. mm Vacuum bar Operating pressure bar External Ø mm Inches Burst pressure bar Min. bending radius mm
Product Name Internal Ø nom. mm Vacuum bar Operating pressure bar External Ø mm Inches Burst pressure bar Min. bending radius mm
CHEM 13-6 TEFLON 13.0 0.7 16 25 1/2" 64 90
CHEM 19-6 TEFLON 19.0 0.7 16 31 3/4" 64 130
CHEM 25-6 TEFLON 25.0 0.7 16 37 1" 64 170
CHEM 32-6 TEFLON 32.0 0.7 16 44 1.1/4" 64 215
CHEM 38-6.5 TEFLON 38.0 0.7 16 51 1.1/2" 64 255
CHEM 50-8 TEFLON 50.0 0.7 16 66 2" 64 330
CHEM 63.5-8 TEFLON 63.5 0.7 16 80 2.1/2" 48 430
CHEM 75-8 TEFLON 75.0 0.7 16 91 3" 64 510
CHEM 100-8 TEFLON 100.0 0.7 12 116 4" 48 675

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.