INDU WAS

Industrial water hose

  • Image_1 Image_1

Properties

Application area Nurseries, agriculture
As low pressure hose in industry and construction sector
Colour black
Inner layer Natural and synthetic rubber
Insert highly tear-resistant synthetic textile insert
Media Water
Air
Outer layer Synthetic rubber, weather resistant
Temp. max. 70 °C
Temp. min. -25 °C

Article Table

Product Name Internal Ø nom. mm Unit Roll length m Operating pressure bar only per spool External Ø mm Inches Burst pressure bar Min. bending radius mm
Product Name Internal Ø nom. mm Unit Roll length m Operating pressure bar only per spool External Ø mm Inches Burst pressure bar Min. bending radius mm
INDU WAS 25-5 25.4 Reel 40 10 Yes 33 1" 30 254
INDU WAS 28-5 28.0 Reel 40 10 Yes 38 - 30 280
INDU WAS 32-5.5 32.0 Reel 40 10 Yes 43 1.1/4" 30 210
INDU WAS 38-6 38.0 Reel 40 10 Yes 50 1.1/2" 30 250
INDU WAS 45-7 44.5 Reel 40 10 Yes 54 1.3/4" 30 445
INDU WAS 50-7 50.0 Reel 40 10 Yes 64 2" 30 350
INDU WAS 63-7 63.5 Reel 40 10 Yes 74 2.1/2" 30 635
INDU WAS 75-7 75.0 Reel 40 10 Yes 91 3" 30 550
INDU WAS 102-7 100.0 Reel 40 10 Yes 116 4" 30 720
INDU WAS 110-9 110.0 Reel 40 10 Yes 128 - 30 1100
INDU WAS 127-9 127.0 Reel 40 10 Yes 140 5" 30 1270
INDU WAS 152-11 150.0 Reel 40 10 Yes 170 6" 30 1200
INDU WAS 203-11 203.2 Reel 20 10 Yes 222 8" 30 2032

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.