KUEHLER

Radiator hose

  • Image_1 Image_1

Properties

Application area Radiator hose
Colour black
Inner layer EPDM
Insert up to ID 19: one polyester braided insert; from ID 20: one Rayon braided insert
Media Cooling water
Cooling fluids
Outer layer EPDM (from ID 20 mm patterned material)
Standard DIN 73411
Temp. max. 120 °C
Temp. min. -40 °C

Article Table

Product Name ID x Wall thickness Unit Roll length m Operating pressure bar only per spool Burst pressure bar
Product Name ID x Wall thickness Unit Roll length m Operating pressure bar only per spool Burst pressure bar
KUEHLER 08-3.5 8 x 3.5 Reel 40 4 Yes 12
KUEHLER 10-3.5 10 x 3.5 Reel 40 4 Yes 12
KUEHLER 12-3.5 12 x 3.5 Reel 40 4 Yes 12
KUEHLER 13-3.5 13 x 3.5 Reel 40 4 Yes 12
KUEHLER 15-3.5 15 x 3.5 Reel 40 4 Yes 12
KUEHLER 16-3.5 16 x 3.5 Reel 40 4 Yes 12
KUEHLER 18-3.5 18 x 3.5 Reel 40 4 Yes 12
KUEHLER 20-3.5 20 x 3.5 Reel 40 4 Yes 12
KUEHLER 22-3.5 22 x 3.5 Reel 40 4 Yes 12
KUEHLER 25-3.5 25 x 3.5 Reel 40 4 Yes 12
KUEHLER 28-4 28 x 4 Reel 40 4 Yes 12
KUEHLER 30-4 30 x 4 Reel 40 4 Yes 12
KUEHLER 32-4 32 x 4 Reel 40 4 Yes 12
KUEHLER 35-4 35 x 4 Reel 40 4 Yes 12
KUEHLER 38-5 38 x 5 Meter 40 4 No 12
KUEHLER 40-5 40 x 5 Meter 40 4 No 12
KUEHLER 42-5 42 x 5 Meter 40 4 No 12
KUEHLER 45-5 45 x 5 Meter 40 4 No 12
KUEHLER 50-5 50 x 5 Meter 40 4 No 12
KUEHLER 55-5 55 x 5 Meter 40 4 No 12
KUEHLER 60-5 60 x 5 Meter 40 4 No 12
KUEHLER 70-5 70 x 5 Meter 40 4 No 12
KUEHLER 90-6 90 x 6 Meter 40 4 No 12

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.