HK 0P ABBA

Gear pump, size 0 ABBA

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Material Housing: Aluminium
Front flange, end cover: Aluminium
Thread pressure side G 1/4"
Thread suction side G 1/4"

Description

European standard pump – hole pattern 66 – 22 dia. – cylinder dia. 7 – threaded fitting

Hints

Anzugsdrehmoment der Befestigungsmutter auf der Welle: 11,5 Nm

Article Table

Product Name VFU cm³ p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min Direction of rotation p2max. bar B mm Weight kg
Product Name VFU cm³ p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min Direction of rotation p2max. bar B mm Weight kg
HK 0P 01 01 ABBA 0.16 220 56.0 9000 260 700 anti-clockwise rotating 240 26.2 0.400
HK 0P 01 02 ABBA 0.16 220 56.0 9000 260 700 clockwise rotating 240 26.2 0.400
HK 0P 02 01 ABBA 0.24 220 56.5 9000 260 700 anti-clockwise rotating 240 26.5 0.410
HK 0P 02 02 ABBA 0.24 220 56.5 9000 260 700 clockwise rotating 240 26.5 0.410
HK 0P 04 01 ABBA 0.45 220 58.0 9000 260 700 anti-clockwise rotating 240 27.3 0.420
HK 0P 04 02 ABBA 0.45 220 58.0 9000 260 700 clockwise rotating 240 27.3 0.420
HK 0P 05 01 ABBA 0.56 220 59.0 9000 260 700 anti-clockwise rotating 240 27.8 0.430
HK 0P 05 02 ABBA 0.56 220 59.0 9000 260 700 clockwise rotating 240 27.8 0.430
HK 0P 06 01 ABBA 0.75 220 60.5 9000 260 700 anti-clockwise rotating 240 28.5 0.440
HK 0P 06 02 ABBA 0.75 220 60.5 9000 260 700 clockwise rotating 240 28.5 0.440
HK 0P 07 01 ABBA 0.92 220 62.0 6000 260 700 anti-clockwise rotating 240 29.3 0.460
HK 0P 07 02 ABBA 0.92 220 62.0 6000 260 700 clockwise rotating 240 29.3 0.460
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Order hints

Further pump versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.