HK 1P GIIA

Gear pump, size 1 GIIA

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Material Housing: Aluminium
Front flange, end cover: Aluminium
Pitch circle pressure side 30 / M6
Pitch circle suction side 30 / M6

Description

European standard pump – hole pattern 73 x 56 – dia. 30 – taper 1:8 – flange fitting

Hints

Anzugsdrehmoment der Befestigungsmutter auf der Welle: 11,5 Nm

Article Table

Product Name VFU cm³ p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min Direction of rotation p2max. bar B mm Weight kg
Product Name VFU cm³ p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min Direction of rotation p2max. bar B mm Weight kg
HK 1P 16 11 GIIA 0.91 240 77.1 6000 280 700 anti-clockwise rotating 260 37.3 0.950
HK 1P 16 12 GIIA 0.91 240 77.1 6000 280 700 clockwise rotating 260 37.3 0.950
HK 1P 17 11 GIIA 1.17 250 78.0 6000 290 700 anti-clockwise rotating 270 37.8 0.970
HK 1P 17 12 GIIA 1.17 250 78.0 6000 290 700 clockwise rotating 270 37.8 0.970
HK 1P 18 11 GIIA 1.56 250 79.5 6000 290 700 anti-clockwise rotating 270 38.5 1.010
HK 1P 18 12 GIIA 1.56 250 79.5 6000 290 700 clockwise rotating 270 38.5 1.010
HK 1P 20 11 GIIA 2.08 250 81.5 6000 290 700 anti-clockwise rotating 270 39.5 1.030
HK 1P 20 12 GIIA 2.08 250 81.5 6000 290 700 clockwise rotating 270 39.5 1.030
HK 1P 21 11 GIIA 2.60 250 83.5 6000 290 700 anti-clockwise rotating 270 40.5 1.060
HK 1P 21 12 GIIA 2.60 250 83.5 6000 290 700 clockwise rotating 270 40.5 1.060
HK 1P 23 11 GIIA 3.12 240 85.5 6000 290 700 anti-clockwise rotating 260 41.5 1.090
HK 1P 23 12 GIIA 3.12 240 85.5 6000 290 700 clockwise rotating 260 41.5 1.090
HK 1P 25 11 GIIA 3.64 240 87.5 6000 290 700 anti-clockwise rotating 260 42.5 1.120
HK 1P 25 12 GIIA 3.64 240 87.5 6000 290 700 clockwise rotating 260 42.5 1.120
HK 1P 27 11 GIIA 4.16 240 89.5 6000 290 700 anti-clockwise rotating 260 43.5 1.170
HK 1P 27 12 GIIA 4.16 240 89.5 6000 290 700 clockwise rotating 260 43.5 1.170
HK 1P 29 11 GIIA 4.94 240 92.5 6000 290 700 anti-clockwise rotating 260 45.0 1.200
HK 1P 29 12 GIIA 4.94 240 92.5 6000 290 700 clockwise rotating 260 45.0 1.200
HK 1P 31 11 GIIA 5.85 190 96.0 5000 290 700 anti-clockwise rotating 260 46.8 1.260
HK 1P 31 12 GIIA 5.85 190 96.0 5000 290 700 clockwise rotating 260 46.8 1.260
HK 1P 32 11 GIIA 6.50 190 98.5 5000 290 700 anti-clockwise rotating 260 48.0 1.300
HK 1P 32 12 GIIA 6.50 190 98.5 5000 290 700 clockwise rotating 260 48.0 1.300
HK 1P 34 11 GIIA 7.54 190 102.5 5000 260 700 anti-clockwise rotating 210 50.0 1.360
HK 1P 34 12 GIIA 7.54 190 102.5 5000 260 700 clockwise rotating 210 50.0 1.360
HK 1P 36 11 GIIA 9.88 170 111.5 4000 230 700 anti-clockwise rotating 190 54.5 1.500
HK 1P 36 12 GIIA 9.88 170 111.5 4000 230 700 clockwise rotating 190 54.5 1.500
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Order hints

Further pump versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.