HK CBD ZLBA

Gear pump, size 1 CBD

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Cover connection, suction side G 3/8”
Design Economy variant
housing type BH (attachment top right-hand, bottom left-hand)
Flange connection, pressure side Ø 9.25
Material Housing: Aluminium
Front flange, end cover: Aluminium

Description

European standard pump – hole pattern 40 x 40 – dia. 32 – taper 1:8

Hints

Anzugsdrehmoment der Befestigungsmutter auf der Welle: 11,5 Nm

Article Table

Product Name VFU cm³ p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min Direction of rotation p2max. bar Weight kg
Product Name VFU cm³ p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min Direction of rotation p2max. bar Weight kg
HK CBD F211 L1Z LBA 1.1 200 74 6000 250 600 anti-clockwise rotating 220 0.770
HK CBD F216 L1Z LBA 1.6 200 76 6000 250 600 anti-clockwise rotating 220 0.800
HK CBD F221 L1Z LBA 2.1 200 78 6000 250 600 anti-clockwise rotating 220 0.820
HK CBD F227 L1Z LBA 2.7 200 80 6000 250 600 anti-clockwise rotating 220 0.850
HK CBD F232 L1Z LBA 3.2 200 82 5000 250 600 anti-clockwise rotating 220 0.870
HK CBD F237 L1Z LBA 3.7 200 84 4500 250 600 anti-clockwise rotating 220 0.900
HK CBD F242 L1Z LBA 4.2 200 86 4000 250 600 anti-clockwise rotating 220 0.920
HK CBD F258 L1Z LBA 5.8 160 92 2900 200 600 anti-clockwise rotating 180 1.000
HK CBD F280 L1Z LBA 8.0 160 100 2100 200 600 anti-clockwise rotating 180 1.100
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Order hints

Further pump versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.