HK 2P ExBA

Gear pump, size 2 EBBA / ECBA

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Material Housing: Aluminium
Front flange, end cover: Aluminium
Thread pressure side G 1/2"
Thread suction side G 1/2" up to 10.8 VFU ccm
G 3/4" up to 14.4 VFU ccm

Description

European standard pump – hole pattern 96.2 x 71.5 – dia. 36.5 – taper 1:8 – threaded fitting

Article Table

Product Name Direction of rotation p1max. bar VFU cm³ A mm Speed max. r/min p3max. bar B mm Speed min. r/min Weight kg p2max. bar
Product Name Direction of rotation p1max. bar VFU cm³ A mm Speed max. r/min p3max. bar B mm Speed min. r/min Weight kg p2max. bar
HK 2P 41 01 EBBA anti-clockwise rotating 260 4.2 87.2 3500 300 41.7 700 2.20 280
HK 2P 41 02 EBBA clockwise rotating 260 4.2 87.2 3500 300 41.7 700 2.20 280
HK 2P 43 01 EBBA anti-clockwise rotating 260 6.0 90.2 3500 300 43.2 700 2.30 280
HK 2P 43 02 EBBA clockwise rotating 260 6.0 90.2 3500 300 43.2 700 2.30 280
HK 2P 45 01 EBBA anti-clockwise rotating 260 8.4 94.2 3500 300 45.2 700 2.40 280
HK 2P 45 02 EBBA clockwise rotating 260 8.4 94.2 3500 300 45.2 700 2.40 280
HK 2P 47 01 EBBA anti-clockwise rotating 260 10.8 98.2 3500 300 47.2 700 2.50 280
HK 2P 47 02 EBBA clockwise rotating 260 10.8 98.2 3500 300 47.2 700 2.50 280
HK 2P 49 01 ECBA anti-clockwise rotating 250 14.4 104.2 3500 290 50.2 700 2.70 270
HK 2P 49 02 ECBA clockwise rotating 250 14.4 104.2 3500 290 50.2 700 2.70 270
HK 2P 51 01 ECBA anti-clockwise rotating 230 16.8 108.2 3500 270 52.2 700 2.80 250
HK 2P 51 02 ECBA clockwise rotating 230 16.8 108.2 3500 270 52.2 700 2.80 250
HK 2P 53 01 ECBA anti-clockwise rotating 210 19.2 112.2 3000 250 54.2 700 2.90 230
HK 2P 53 02 ECBA clockwise rotating 210 19.2 112.2 3000 250 54.2 700 2.90 230
HK 2P 55 01 ECBA anti-clockwise rotating 200 22.8 118.2 3000 240 57.2 700 3.05 220
HK 2P 55 02 ECBA clockwise rotating 200 22.8 118.2 3000 240 57.2 700 3.05 220
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Order hints

Further pump versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.