HK CBD1 F5

Gear pump, size 3 CBD1F5

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Design Economy variant
Front flange and end cover in cast steel
Material Housing: Aluminium
Front flange, end cover: Cast steel
Pitch circle pressure side 51 / M10
Pitch circle suction side 51/M10 from 20 to 46 VFU ccm
62/M10 from 55 to 63 VFU ccm

Description

European standard pump – hole pattern 128 x 98 – dia. 50.8 – taper 1:8 – flange fitting

Article Table

Product Name Direction of rotation p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min B mm VFU (ccm) cm³ Weight kg p2max. bar
Product Name Direction of rotation p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min B mm VFU (ccm) cm³ Weight kg p2max. bar
HK CBD1F5 20 F37 Z20 clockwise rotating 200 119.0 2000 250 700 58.75 20.00 7.00 220
HK CBD1F5 20 F37 Z2L anti-clockwise rotating 200 119.0 2000 250 700 58.75 20.00 7.00 220
HK CBD1F5 26 F37 Z20 clockwise rotating 200 123.5 2000 250 700 61.00 26.00 7.30 220
HK CBD1F5 26 F37 Z2L anti-clockwise rotating 200 123.5 2000 250 700 61.00 26.00 7.30 220
HK CBD1F5 33 F37 Z20 clockwise rotating 200 128.5 2000 250 700 63.50 33.00 7.40 220
HK CBD1F5 33 F37 Z2L anti-clockwise rotating 200 128.5 2000 250 700 63.50 33.00 7.40 220
HK CBD1F5 39 F37 Z20 clockwise rotating 200 132.5 2000 250 700 65.50 39.00 7.50 220
HK CBD1F5 39 F37 Z2L anti-clockwise rotating 200 132.5 2000 250 700 65.50 39.00 7.50 220
HK CBD1F5 46 F37 Z20 clockwise rotating 200 138.0 2000 250 700 68.25 46.00 7.70 220
HK CBD1F5 46 F37 Z2L anti-clockwise rotating 200 138.0 2000 250 700 68.25 46.00 7.70 220
HK CBD1F5 55 F39 Z20 clockwise rotating 200 143.0 2000 250 700 70.25 55.00 8.20 220
HK CBD1F5 55 F39 Z2L anti-clockwise rotating 200 143.0 2000 250 700 70.25 55.00 8.20 220
HK CBD1F5 63 F39 Z20 clockwise rotating 200 149.5 2000 250 700 74.00 63.00 8.50 220
HK CBD1F5 63 F39 Z2L anti-clockwise rotating 200 149.5 2000 250 700 74.00 63.00 8.50 220
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Order hints

Further pump versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.