HK X3P ABAA/ACBA

Gear pump, size 3 X3P

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Material Housing: Aluminium
Front flange, end cover: Aluminium
Pitch circle pressure side 40/M8 up to 50.88 VFU ccm
51/M10 up to 60.81 VFU ccm
Pitch circle suction side 51/M10 up to 50.88 VFU ccm
62/M10 up to 60.81 VFU ccm

Description

European standard pump – hole pattern 128 x 98 – dia. 50.8 – taper 1:8 – flange fitting

Hints

Anzugsdrehmoment der Befestigungsmutter auf der Welle: 75 Nm

Article Table

Product Name VFU cm³ p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min Direction of rotation p2max. bar B mm Weight kg
Product Name VFU cm³ p1max. bar A mm Speed max. r/min p3max. bar Speed min. r/min Direction of rotation p2max. bar B mm Weight kg
HK X3P 70 01 ABAA 21.10 250 127 3000 270 700 anti-clockwise rotating 260 63.5 7.150
HK X3P 70 02 ABAA 21.10 250 127 3000 270 700 clockwise rotating 260 63.5 7.150
HK X3P 72 01 ABAA 26.06 250 136 3000 270 700 anti-clockwise rotating 260 65.5 7.250
HK X3P 72 02 ABAA 26.06 250 136 3000 270 700 clockwise rotating 260 65.5 7.250
HK X3P 74 01 ABAA 32.27 250 141 3000 270 700 anti-clockwise rotating 260 68.0 7.390
HK X3P 74 02 ABAA 32.27 250 141 3000 270 700 clockwise rotating 260 68.0 7.390
HK X3P 78 01 ABAA 38.47 250 145 2800 270 700 anti-clockwise rotating 260 70.5 7.520
HK X3P 78 02 ABAA 38.47 250 145 2800 270 700 clockwise rotating 260 70.5 7.520
HK X3P 79 01 ABAA 43.44 250 145 2800 270 700 anti-clockwise rotating 260 72.5 7.630
HK X3P 79 02 ABAA 43.44 250 145 2800 270 700 clockwise rotating 260 72.5 7.630
HK X3P 81 01 ABAA 50.88 230 151 2800 250 700 anti-clockwise rotating 240 75.5 7.790
HK X3P 81 02 ABAA 50.88 230 151 2800 250 700 clockwise rotating 240 75.5 7.790
HK X3P 83 01 ACBA 60.81 230 159 2300 250 700 anti-clockwise rotating 240 79.5 8.010
HK X3P 83 02 ACBA 60.81 230 159 2300 250 700 clockwise rotating 240 79.5 8.010
HK X3P 87 01 ACBA 74.46 180 175 2300 200 700 anti-clockwise rotating 190 85.0 8.300
HK X3P 87 02 ACBA 74.46 180 175 2300 200 700 clockwise rotating 190 85.0 8.300
VFU = conveying volume per revolution
p1 = continuous pressure
p2 = working pressure
p3 = maximum pressure

Order hints

Further pump versions available on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.