HK SP DIN 43650

Electrical plug for solenoid coil DIN 43650 / ISO 4400

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design Plug with central screw, type A
Material Housing: Polyamide
Contacts: CuZn
Operating temperature -40 °C to +125 °C
Scope of supply incl. seal and M3 screw
Standard EN 175301-803 (DIN 43650) / ISO 4400
protection class IP 65

Article Table

Product Name Weight kg Colour Version
Product Name Weight kg Colour Version
HK SP 664 0.07 black standard 4-pin
HK SP 664 A 0.07 grey standard 4-pin
HK SP 666 0.07 black standard 3-pin
HK SP 666 A 0.07 grey standard 3-pin
HK SP 667 24 0.07 transparent with LED for 12/24 V DC
HK SP 667 110 0.07 transparent with LED for 110 V AC
HK SP 667 220 0.07 transparent with LED for 230 V AC
HK SP 668 24 0.07 transparent / black with LED 12/24 V and protective circuit
HK SP 668 24 A 0.07 transparent / grey with LED 12/24 V and protective circuit
HK SP 669 0.07 black with rectifier
HK SP 669 A 0.07 grey with rectifier

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.