XHFM T HL/XHFM T HS

Measuring connection, M16 x 2 series

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 + 2 metric cylindrical outer thread
Connection 3 Measuring connection M 16 x 2
Construction T shaped
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 + 2 24° inner cone
Standard DIN 2353
ISO 8434-1
Surface electro galvanised
Temp. max. 100 °C
Temp. min. -20 °C

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name G1 + G2 External pipe Ø mm Series Ø d2 mm Max. working pressure bar
Product Name G1 + G2 External pipe Ø mm Series Ø d2 mm Max. working pressure bar
XHFM T HL 04 M 12 x 1,5 6 L 6 315
XHFM T HL 06 M 14 x 1.5 8 L 8 315
XHFM T HL 08 M 16 x 1.5 10 L 10 315
XHFM T HL 10 M 18 x 1.5 12 L 12 315
XHFM T HL 13 M 22 x 1.5 15 L 15 315
XHFM T HL 16 M 26 x 1.5 18 L 18 315
XHFM T HL 20 M 30 x 2 22 L 22 160
XHFM T HL 25 M 36 x 2 28 L 28 160
XHFM T HL 32 M 45 x 2 35 L 35 160
XHFM T HL 40 M 52 x 2 42 L 42 160
XHFM T HS 03 M 14 x 1.5 6 S 6 630
XHFM T HS 04 M 16 x 1.5 8 S 8 630
XHFM T HS 06 M 18 x 1.5 10 S 10 630
XHFM T HS 08 M 20 x 1.5 12 S 12 630
XHFM T HS 10 M 22 x 1.5 14 S 14 630
XHFM T HS 13 M 24 x 1.5 16 S 16 400
XHFM T HS 16 M 30 x 2 20 S 20 400
XHFM T HS 20 M 36 x 2 25 S 25 400
XHFM T HS 25 M 42 x 2 30 S 30 400
XHFM T HS 32 M 52 x 2 38 S 38 315
Series: LL = Very light L = Light S = Heavy
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.