Cutting ring

  • Image_1 Image_1
  • Image_2 Image_2


Construction type French series
Design Cutting ring
Material Steel
Surface electro galvanised


Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm Operating pressure Ø d2 mm
Product Name L1 mm Operating pressure Ø d2 mm
SRD 13 10.0 PN 400 13.25
SRD 17 10.0 PN 400 16.75
SRD 21 10.0 PN 250 21.25
SRD 27 10.5 PN 250 26.75
SRD 33 10.5 PN 160 33.50
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.