Union nut F

  • Image_1 Image_1
  • Image_2 Image_2


Connection 1 metric nut thread
Construction type French series
Design Union nut
Material Steel
Surface electro galvanised


Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm Operating pressure S1 Ø d2 mm G1
Product Name L1 mm Operating pressure S1 Ø d2 mm G1
UEM NW 10 F 17.0 PN 400 27 13.25 M 20 x 1.5
UEM NW 13 F 18.0 PN 400 30 16.75 M 24 x 1.5
UEM NW 16 F 20.5 PN 250 36 21.25 M 30 x 1.5
UEM NW 20 F 21.5 PN 250 42 26.75 M 36 x 1.5
UEM NW 25 F 23.5 PN 160 55 33.50 M 45 x 1.5
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.