XETOR

Screw-in fitting, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 metric cylindrical outer thread
Construction T shaped
Design Adjustable direction screw-in fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 form G
Sealing form 2 + 3 24° inner cone
Standard ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L5 mm i mm S1 L4 mm OR L3 mm External pipe Ø mm Operating pressure AF mm G1 Series G2 + G3 Ø d2 mm
Product Name L5 mm i mm S1 L4 mm OR L3 mm External pipe Ø mm Operating pressure AF mm G1 Series G2 + G3 Ø d2 mm
XETOR NW 04 HL 19 7 14 14 8.00 x 1.50 21 6 PN 315 14 G 1/8" -28 L M 12 x 1,5 6
XETOR NW 06 HL 23 9 19 16 10.77 x 2.62 23 8 PN 315 14 G 1/4" -19 L M 14 x 1.5 8
XETOR NW 08 HL 25 9 19 17 10.77 x 2.62 24 10 PN 315 19 G 1/4" -19 L M 16 x 1.5 10
XETOR NW 10 HL 28 9 22 19 13.94 x 2.62 26 12 PN 250 19 G 3/8" -19 L M 18 x 1.5 12
XETOR NW 13 HL 30 13 27 21 17.86 x 2.62 28 15 PN 250 22 G 1/2" -14 L M 22 x 1.5 15
XETOR NW 16 HL 36 13 27 24 17.86 x 2.62 31 18 PN 250 27 G 1/2" -14 L M 26 x 1.5 18
XETOR NW 20 HL 36 13 36 28 23.47 x 2.62 35 22 PN 160 30 G 3/4" -14 L M 30 x 2 22
XETOR NW 25 HL 44 15 41 31 29.50 x 3.53 38 28 PN 160 36 G 1" -11 L M 36 x 2 28
XETOR NW 32 HL 50 15 50 38 37.69 x 3.53 48 35 PN 160 50 G 1.1/4" -11 L M 45 x 2 35
XETOR NW 40 HL 52 15 50 38 44.04 x 3.53 49 42 PN 160 50 G 1.1/2" -11 L M 52 x 2 42
XETOR NW 03 HS 23 9 19 15 10.77 x 2.62 22 6 PN 315 14 G 1/4" -19 S M 14 x 1.5 6
XETOR NW 04 HS 27 9 19 17 10.77 x 2.62 24 8 PN 315 19 G 1/4" -19 S M 16 x 1.5 8
XETOR NW 06 HS 29 9 22 18 13.94 x 2.62 25 10 PN 250 19 G 3/8" -19 S M 18 x 1.5 10
XETOR NW 08 HS 29 9 22 22 13.94 x 2.62 29 12 PN 250 22 G 3/8" -19 S M 20 x 1.5 12
XETOR NW 10 HS 36 13 27 25 17.86 x 2.62 43 14 PN 250 27 G 1/2" -14 S M 22 x 1.5 14
XETOR NW 13 HS 36 13 27 25 17.86 x 2.62 33 16 PN 250 27 G 1/2" -14 S M 24 x 1.5 16
XETOR NW 16 HS 39 12 36 28 23.47 x 2.62 38 20 PN 250 30 G 3/4" -14 S M 30 x 2 20
XETOR NW 20 HS 44 14 41 30 29.74 x 3.53 42 25 PN 250 36 G 1" -11 S M 36 x 2 25
XETOR NW 25 HS 49 15 50 36 37.69 x 3.53 49 30 PN 160 50 G 1.1/4" -11 S M 42 x 2 30
XETOR NW 32 HS 55 15 55 34 44.04 x 3.53 50 38 PN 160 50 G 1.1/2" -11 S M 52 x 2 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
Ø d2 = External pipe diameter
SW, S1, S2, S3 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.