Properties

Design Guide ring
Installation insert into the groove
Media Mineral oil
Water emulsions
Pressure resistance as DIN 53454 (N/mm2) 340 N/mm²
Sliding speed max. 1.0 m/s
Surface pressure 50 N/mm2
Temp. max. 130 °C
Temp. min. -40 °C

Description

Easy working of the fitting groove and assembly.
High load-bearing capacity.
Low coefficient of friction (PTFE).
No water absorption.
Long service life.

Hints

Calculation of shear force; F= p x D x L x n
F= maximum shear force (N)
p = maximum surface pressure (N/mm2)
D x L= projected area (mm2)
n= quantity of rings

Article Table

Product Name D mm d mm L mm Standard grooves Pressure resistance as DIN 53454 (N/mm2) N/mm² Surface pressure
Product Name D mm d mm L mm Standard grooves Pressure resistance as DIN 53454 (N/mm2) N/mm² Surface pressure
IGTP1 250 630 220 A 27 22 6.3 - - -
IGTP1 250 560 250 A 30 25 5.6 ISO 10766 340 50 N/mm²
IGTP1 250 630 250 A 30 25 6.3 - - -
IGTP1 250 970 250 A 30 25 9.7 - 340 50 N/mm²
IGTP1 250 560 280 A 33 28 5.6 ISO 10766 - -
IGTP1 250 630 280 A 33 28 6.3 - - -
IGTP1 250 560 300 A 35 30 5.6 - 340 50 N/mm²
IGTP1 250 970 300 A 35 30 9.7 - 340 50 N/mm²
IGTP1 250 560 320 A 37 32 5.6 ISO 10766 - -
IGTP1 250 630 320 A 37 32 6.3 - - -
IGTP1 250 970 320 A 37 32 9.7 ISO 10766 - -
IGTP1 250 560 350 A 40 35 5.6 - 340 50 N/mm²
IGTP1 250 560 360 A 41 36 5.6 ISO 10766 - -
IGTP1 250 630 360 A 41 36 6.3 - - -
IGTP1 250 970 360 A 41 36 9.7 ISO 10766 - -
IGTP1 251 500 360 A 41 36 15.0 - - -
IGTP1 250 560 400 A 45 40 5.6 ISO 10766 340 50 N/mm²
IGTP1 250 970 400 A 45 40 9.7 ISO 10766 340 50 N/mm²
IGTP1 250 560 450 A 50 45 5.6 ISO 10766 340 50 N/mm²
IGTP1 250 970 450 A 50 45 9.7 ISO 10766 340 50 N/mm²
IGTP1 252 000 450 A 50 45 20.0 - 340 50 N/mm²
IGTP1 250 560 500 A 55 50 5.6 ISO 10766 340 50 N/mm²
IGTP1 250 970 500 A 55 50 9.7 ISO 10766 340 50 N/mm²
IGTP1 251 500 500 A 55 50 15.0 - 340 50 N/mm²
IGTP1 250 560 550 A 60 55 5.6 ISO 10766 340 50 N/mm²
IGTP1 250 970 550 A 60 55 9.7 - 340 50 N/mm²
IGTP1 251 500 550 A 60 55 15.0 - 340 50 N/mm²
IGTP1 250 560 560 A 61 56 5.6 ISO 10766 - -
IGTP1 250 970 560 A 61 56 9.7 ISO 10766 - -
IGTP1 251 500 560 A 61 56 15.0 - - -
IGTP1 250 560 600 A 65 60 5.6 - 340 50 N/mm²
IGTP1 250 970 600 A 65 60 9.7 - 340 50 N/mm²
IGTP1 251 500 600 A 65 60 15.0 - 340 50 N/mm²
IGTP1 250 970 630 A 68 63 9.7 ISO 10766 - -
IGTP1 250 560 650 A 70 65 5.6 - - -
IGTP1 250 970 650 A 70 65 9.7 - 340 50 N/mm²
IGTP1 252 000 650 A 70 65 20.0 - 340 50 N/mm²
IGTP1 250 560 700 A 75 70 5.6 ISO 10766 340 50 N/mm²
IGTP1 250 970 700 A 75 70 9.7 ISO 10766 340 50 N/mm²
IGTP1 251 500 700 A 75 70 15.0 - 340 50 N/mm²
IGTP1 252 000 700 A 75 70 20.0 - 340 50 N/mm²
IGTP1 200 810 750 A 80 75 8.1 - - -
IGTP1 250 560 750 A 80 75 5.6 - - -
IGTP1 250 630 750 A 80 75 6.3 - - -
IGTP1 250 970 750 A 80 75 9.7 - 340 50 N/mm²
IGTP1 252 000 750 A 80 75 20.0 - - -
IGTP1 250 560 800 A 85 80 5.6 - 340 50 N/mm²
IGTP1 250 970 800 A 85 80 9.7 ISO 10766 340 50 N/mm²
IGTP1 251 500 800 A 85 80 15.0 ISO 10766 340 50 N/mm²
IGTP1 252 500 800 A 85 80 25.0 - 340 50 N/mm²
IGTP1 250 970 850 A 90 85 9.7 - - -
IGTP1 251 500 850 A 90 85 15.0 - 340 50 N/mm²
IGTP1 250 970 900 A 95 90 9.7 ISO 10766 340 50 N/mm²
IGTP1 251 500 900 A 95 90 15.0 ISO 10766 340 50 N/mm²
IGTP1 250 970 950 A 100 95 9.7 - 340 50 N/mm²
IGTP1 251 500 950 A 100 95 15.0 - 340 50 N/mm²
IGTP1 252 000 950 A 100 95 20.0 - 340 50 N/mm²
IGTP1 252 500 950 A 100 95 25.0 - - -
IGTP1 250 971 000 A 105 100 9.7 ISO 10766 340 50 N/mm²
IGTP1 251 501 000 A 105 100 15.0 ISO 10766 340 50 N/mm²
IGTP1 252 001 000 A 105 100 20.0 - 340 50 N/mm²
IGTP1 252 501 000 A 105 100 25.0 - 340 50 N/mm²
IGTP1 250 971 100 A 115 110 9.7 ISO 10766 - -
IGTP1 251 501 100 A 115 110 15.0 ISO 10766 340 50 N/mm²
IGTP1 252 501 100 A 115 110 25.0 - 340 50 N/mm²

Order hints

We are able to produce guide rings with diameters of 20 to 1,200 mm with short lead times.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.