TDO

Complete piston TDO

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application Hydraulics
Design Complete pistons
Installation push onto piston recess with the rubber side and affix with washer and nut.
Material NBR 85° Shore A, with steel core
Media Mineral oil
Water-air
Operating pressure 40 bar
Sliding speed max. 0.5 m/s
Temp. max. 110 °C
Temp. min. -30 °C

Description

Complete pistons.

Article Table

Product Name D mm E mm P mm e mm d mm
Product Name D mm E mm P mm e mm d mm
TDO 26 26 22 15.0 3.0 8.2
TDO 30 30 22 16.0 3.0 8.2
TDO 35 35 26 20.0 3.0 8.2
TDO 40 10 22 20.0 3.0 10.2
TDO 45 45 25 22.0 4.0 10.2
TDO 50 50 25 27.0 4.0 10.2
TDO 55 55 25 32.0 4.0 10.2
TDO 60 60 26 37.0 4.0 12.2
TDO 63 63 25 40.0 4.0 12.2
TDO 70 70 30 44.0 5.0 12.2
TDO 80 80 30 54.0 5.0 12.2
TDO 100 100 35 72.0 6.0 12.2
TDO 110 110 40 78.0 6.0 12.2
TDO 115 115 30 83.0 8.0 20.2
TDO 125 125 40 85.0 8.0 20.2
TDO 140 140 40 100.0 10.0 20.2
TDO 150 150 40 105.0 10.0 20.2
TDO 200 200 40 146.0 10.0 20.2
TDO 250 250 40 200.0 12.0 30.2
TDO 300 300 40 250.0 12.0 35.2

Order hints

Alternative material possible: FPM.
For special operating conditions (fluid, temperature, pressure ...) please contact us.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.