DAS

Piston packing set for one-piece pistons DAS

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application Hydraulics
Design Piston packing set
Installation on one-piece pistons A
on multi-part pistons B
Material (2) Guide ring: acetal resin
(1) Seal: NBR
(3) Support ring: Polyester
Media Mineral oil
Water emulsions
Operating pressure 300 bar
Sliding speed max. 0.5 m/s
Temp. max. 110 °C
Temp. min. -30 °C

Description

Extremely good sealing effect at low pressure.
Easy assembly.
Simple solution.

Article Table

Product Name D mm L mm G mm P mm d mm M mm
Product Name D mm L mm G mm P mm d mm M mm
DAS 30 17 30 15.4 6.35 28.50 17 26.50
DAS 40 24 40 18.4 6.35 38.50 24 35.40
DAS 40 30 40 16.4 6.35 38.50 30 35.40
DAS 50 34 50 18.4 6.35 48.66 34 45.41
DAS 60 44 60 18.4 6.35 58.65 44 55.39
DAS 63 47 63 18.4 6.35 61.63 47 58.39
DAS 70 50 70 22.4 6.35 68.34 50 64.18
DAS 80 60 80 22.4 6.35 78.34 60 74.16
DAS 90 70 90 22.4 6.35 88.31 70 84.15
DAS 100 75 100 22.4 6.35 98.05 75 93.14
DAS 110 85 110 22.4 6.35 108.00 85 103.10
DAS 125 100 125 25.4 6.35 122.96 100 118.08
DAS 130 105 130 25.4 9.50 127.50 105 122.60
DAS 140 115 140 25.4 9.50 137.50 115 132.60
DAS 150 125 150 25.4 9.50 147.50 125 142.60
DAS 160 135 160 25.4 9.50 157.50 135 152.60
DAS 180 155 180 25.4 12.70 177.10 155 171.72
DAS 200 175 200 25.4 12.70 197.00 175 191.62
DAS 220 195 220 25.4 12.70 217.00 195 211.62

Order hints

Alternative material possible: FPM.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.