Piston packing set for split pistons DPC-NEO

  • Image_1 Image_1
  • Image_2 Image_2


Application Hydraulics
Installation on multi-part pistons
Material (3) Back ring: acetal resin
(1) Seal: fabric-reinforced NBR
Max. operating pressure up to 700 bar
Media Mineral oil
Water emulsions
Sliding speed max. 0.5 m/s
Temp. max. 110 °C
Temp. min. -30 °C


Extremely good sealing effect at low pressure.
Low friction.
High pressure.
Simple solution.

Article Table

Product Name D mm P mm d mm L mm
Product Name D mm P mm d mm L mm
DPC 85 65-NEO 85 83.3 65 22.4
DPC 90 70-NEO 90 88.3 70 22.4
DPC 100 80-NEO 100 98.3 80 25.4
DPC 120 100-NEO 120 118.3 100 25.4


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.