CH2

Chevron ring CH2

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application Hydraulics
Design Chevron rod ring
Installation in open grooves
Material (1) Thrust ring: laminated fabric-reinforced NBR
(2) Chevron ring: 2 x NBR + 3 x fabric-reinforced NBR
(3) Support ring: acetal resin / PTBR
Media Mineral oil
Water emulsions
Operating pressure 500 bar
Sliding speed max. 0.5 m/s
Temp. max. 110 °C
Temp. min. -30 °C

Description

High temperature resistance.
for difficult working conditions such as hydraulic shocks, strong vibrations or poor surfaces.

Article Table

Product Name D mm L mm d nom. mm
Product Name D mm L mm d nom. mm
CH2-020 32.0 22.5 20.00
CH2-022 34.0 22.5 22.00
CH2-025 40.0 22.5 25.00
CH2-028 43.0 22.5 28.00
CH2-030 45.0 22.5 30.00
CH2-032 47.0 22.5 32.00
CH2-035 50.0 22.5 35.00
CH2-036 51.0 22.5 36.00
CH2-040 55.0 22.5 40.00
CH2-042 57.0 22.5 42.00
CH2-045 65.0 27.5 45.00
CH2-050 70.0 30.0 50.00
CH2-055 75.0 30.0 55.00
CH2-056 76.0 37.0 56.00
CH2-060 80.0 37.0 60.00
CH2-063 83.0 37.0 63.00
CH2-065 85.0 40.0 65.00
CH2-070 90.0 40.0 70.00
CH2-075 95.0 40.0 75.00
CH2-080 100.0 40.0 80.00
CH2-090 110.0 40.0 90.00
CH2-100 120.0 40.0 100.00
CH2-110 130.0 40.0 110.00
CH2-120 145.0 50.0 120.00
CH2-125 150.0 46.0 125.00
CH2-140 165.0 46.0 140.00
CH2-160 190.0 60.0 160.00
CH2-180 210.0 60.0 180.00
CH2-200 230.0 60.0 200.00

Order hints

Alternative material possible: FPM.
For special operating conditions (fluid, temperature, pressure ...) please contact us.
Other sizes on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.