Application Hydraulics
Design rod seal
Installation in closed or open grooves
Material FPM-K
Media Mineral oil
Water emulsions
Operating pressure 250 bar
Sliding speed max. 0.5 m/s
Temp. max. 150 °C
Temp. min. -30 °C


Low-friction seal.
Extremely good sealing effect at low pressure.
Simple solution.

Article Table

Product Name D mm L mm d nom. mm
Product Name D mm L mm d nom. mm
B 137 098 FPM-K 35.0 9.0 35.00
B 196 137 FPM-K 50.0 11.5 35.00
B 330 275 FPM-K 84.0 12.5 70.00
B 492 413 FPM-K 125.0 12.5 105.00


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.